Able to read all current registers and coils. Test script works
This commit is contained in:
Patrick McDonagh
BIN
Modbus Map.xlsx
BIN
Modbus Map.xlsx
Binary file not shown.
302
analog.json
302
analog.json
@@ -1,149 +1,159 @@
|
||||
[
|
||||
{"tag_name": "_Firmware_Rev", "register_type": "ir", "register_number": 1, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "_Program_Firmware", "register_type": "ir", "register_number": 6, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[1].Card_Type", "register_type": "ir", "register_number": 11, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[1].Downhole_AdjustedGrossStroke", "register_type": "ir", "register_number": 16, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Downhole_FluidLoad", "register_type": "ir", "register_number": 21, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[1].Downhole_GrossStroke", "register_type": "ir", "register_number": 26, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Downhole_Max_Load.Load", "register_type": "ir", "register_number": 31, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[1].Downhole_Max_Position.Position", "register_type": "ir", "register_number": 36, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Downhole_Min_Load.Load", "register_type": "ir", "register_number": 41, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[1].Downhole_Min_Position.Position", "register_type": "ir", "register_number": 46, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Downhole_NetStroke", "register_type": "ir", "register_number": 51, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Fillage_Percent", "register_type": "ir", "register_number": 56, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Fluid_Above_Pump", "register_type": "ir", "register_number": 61, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Fluid_Moved", "register_type": "ir", "register_number": 66, "scale_type": 0, "scale_multiplier": 10000},
|
||||
{"tag_name": "Card_Past[1].ID", "register_type": "ir", "register_number": 71, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[1].Num_Points", "register_type": "ir", "register_number": 76, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[1].Polished_Rod_HP", "register_type": "ir", "register_number": 81, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Pump_HP", "register_type": "ir", "register_number": 86, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Pump_Intake_Pressure", "register_type": "ir", "register_number": 91, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].SPM", "register_type": "ir", "register_number": 96, "scale_type": 0, "scale_multiplier": 1000},
|
||||
{"tag_name": "Card_Past[1].Surface_Max.Load", "register_type": "ir", "register_number": 101, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[1].Surface_Max.Position", "register_type": "ir", "register_number": 106, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Surface_Min.Load", "register_type": "ir", "register_number": 111, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[1].Surface_Min.Position", "register_type": "ir", "register_number": 116, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Surface_StrokeLength", "register_type": "ir", "register_number": 121, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[1].Tubing_Movement", "register_type": "ir", "register_number": 126, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Card_Type", "register_type": "ir", "register_number": 131, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[2].Downhole_AdjustedGrossStroke", "register_type": "ir", "register_number": 136, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Downhole_FluidLoad", "register_type": "ir", "register_number": 141, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[2].Downhole_GrossStroke", "register_type": "ir", "register_number": 146, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Downhole_Max_Load.Load", "register_type": "ir", "register_number": 151, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[2].Downhole_Max_Position.Position", "register_type": "ir", "register_number": 156, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Downhole_Min_Load.Load", "register_type": "ir", "register_number": 161, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[2].Downhole_Min_Position.Position", "register_type": "ir", "register_number": 166, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Downhole_NetStroke", "register_type": "ir", "register_number": 171, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Fillage_Percent", "register_type": "ir", "register_number": 176, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Fluid_Above_Pump", "register_type": "ir", "register_number": 181, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Fluid_Moved", "register_type": "ir", "register_number": 186, "scale_type": 0, "scale_multiplier": 10000},
|
||||
{"tag_name": "Card_Past[2].ID", "register_type": "ir", "register_number": 191, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[2].Num_Points", "register_type": "ir", "register_number": 196, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[2].Polished_Rod_HP", "register_type": "ir", "register_number": 201, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Pump_HP", "register_type": "ir", "register_number": 206, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Pump_Intake_Pressure", "register_type": "ir", "register_number": 211, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].SPM", "register_type": "ir", "register_number": 216, "scale_type": 0, "scale_multiplier": 1000},
|
||||
{"tag_name": "Card_Past[2].Surface_Max.Load", "register_type": "ir", "register_number": 221, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[2].Surface_Max.Position", "register_type": "ir", "register_number": 226, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Surface_Min.Load", "register_type": "ir", "register_number": 231, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[2].Surface_Min.Position", "register_type": "ir", "register_number": 236, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Surface_StrokeLength", "register_type": "ir", "register_number": 241, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[2].Tubing_Movement", "register_type": "ir", "register_number": 246, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Card_Type", "register_type": "ir", "register_number": 251, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[3].Downhole_AdjustedGrossStroke", "register_type": "ir", "register_number": 256, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Downhole_FluidLoad", "register_type": "ir", "register_number": 261, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[3].Downhole_GrossStroke", "register_type": "ir", "register_number": 266, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Downhole_Max_Load.Load", "register_type": "ir", "register_number": 271, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[3].Downhole_Max_Position.Position", "register_type": "ir", "register_number": 276, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Downhole_Min_Load.Load", "register_type": "ir", "register_number": 281, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[3].Downhole_Min_Position.Position", "register_type": "ir", "register_number": 286, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Downhole_NetStroke", "register_type": "ir", "register_number": 291, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Fillage_Percent", "register_type": "ir", "register_number": 296, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Fluid_Above_Pump", "register_type": "ir", "register_number": 301, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Fluid_Moved", "register_type": "ir", "register_number": 306, "scale_type": 0, "scale_multiplier": 10000},
|
||||
{"tag_name": "Card_Past[3].ID", "register_type": "ir", "register_number": 311, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[3].Num_Points", "register_type": "ir", "register_number": 316, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[3].Polished_Rod_HP", "register_type": "ir", "register_number": 321, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Pump_HP", "register_type": "ir", "register_number": 326, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Pump_Intake_Pressure", "register_type": "ir", "register_number": 331, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].SPM", "register_type": "ir", "register_number": 336, "scale_type": 0, "scale_multiplier": 1000},
|
||||
{"tag_name": "Card_Past[3].Surface_Max.Load", "register_type": "ir", "register_number": 341, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[3].Surface_Max.Position", "register_type": "ir", "register_number": 346, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Surface_Min.Load", "register_type": "ir", "register_number": 351, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[3].Surface_Min.Position", "register_type": "ir", "register_number": 356, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Surface_StrokeLength", "register_type": "ir", "register_number": 361, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[3].Tubing_Movement", "register_type": "ir", "register_number": 366, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Card_Type", "register_type": "ir", "register_number": 371, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[4].Downhole_AdjustedGrossStroke", "register_type": "ir", "register_number": 376, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Downhole_FluidLoad", "register_type": "ir", "register_number": 381, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[4].Downhole_GrossStroke", "register_type": "ir", "register_number": 386, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Downhole_Max_Load.Load", "register_type": "ir", "register_number": 391, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[4].Downhole_Max_Position.Position", "register_type": "ir", "register_number": 396, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Downhole_Min_Load.Load", "register_type": "ir", "register_number": 401, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[4].Downhole_Min_Position.Position", "register_type": "ir", "register_number": 406, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Downhole_NetStroke", "register_type": "ir", "register_number": 411, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Fillage_Percent", "register_type": "ir", "register_number": 416, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Fluid_Above_Pump", "register_type": "ir", "register_number": 421, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Fluid_Moved", "register_type": "ir", "register_number": 426, "scale_type": 0, "scale_multiplier": 10000},
|
||||
{"tag_name": "Card_Past[4].ID", "register_type": "ir", "register_number": 431, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[4].Num_Points", "register_type": "ir", "register_number": 436, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[4].Polished_Rod_HP", "register_type": "ir", "register_number": 441, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Pump_HP", "register_type": "ir", "register_number": 446, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Pump_Intake_Pressure", "register_type": "ir", "register_number": 451, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].SPM", "register_type": "ir", "register_number": 456, "scale_type": 0, "scale_multiplier": 1000},
|
||||
{"tag_name": "Card_Past[4].Surface_Max.Load", "register_type": "ir", "register_number": 461, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[4].Surface_Max.Position", "register_type": "ir", "register_number": 466, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Surface_Min.Load", "register_type": "ir", "register_number": 471, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Card_Past[4].Surface_Min.Position", "register_type": "ir", "register_number": 476, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Surface_StrokeLength", "register_type": "ir", "register_number": 481, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Card_Past[4].Tubing_Movement", "register_type": "ir", "register_number": 486, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Drive_Speed_Reference_SP", "register_type": "ir", "register_number": 491, "scale_type": 0, "scale_multiplier": 10},
|
||||
{"tag_name": "Drive_Torque_Percent", "register_type": "ir", "register_number": 496, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_Average_SPM", "register_type": "ir", "register_number": 501, "scale_type": 0, "scale_multiplier": 1000},
|
||||
{"tag_name": "GAUGEOFF_Downhole_GrossStroke", "register_type": "ir", "register_number": 506, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_Downhole_NetStroke", "register_type": "ir", "register_number": 511, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_Electricity_Cost", "register_type": "ir", "register_number": 516, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_Fluid_Above_Pump", "register_type": "ir", "register_number": 521, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_Inflow_Rate", "register_type": "ir", "register_number": 526, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_kWh", "register_type": "ir", "register_number": 531, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_kWh_Regen", "register_type": "ir", "register_number": 536, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_Lifting_Cost", "register_type": "ir", "register_number": 541, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_Max_Load", "register_type": "ir", "register_number": 546, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "GAUGEOFF_Min_Load", "register_type": "ir", "register_number": 551, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "GAUGEOFF_Percent_Run", "register_type": "ir", "register_number": 556, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_Polished_Rod_HP", "register_type": "ir", "register_number": 561, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_Pump_Intake_Pressure", "register_type": "ir", "register_number": 566, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_Surface_StrokeLength", "register_type": "ir", "register_number": 571, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "GAUGEOFF_Tubing_Movement", "register_type": "ir", "register_number": 576, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Gearbox_Loading", "register_type": "ir", "register_number": 581, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Gearbox_Torque", "register_type": "ir", "register_number": 586, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Input_Analog_1_AIN.Val", "register_type": "ir", "register_number": 591, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Input_Analog_2_AIN.Val", "register_type": "ir", "register_number": 596, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Input_Analog_3_AIN.Val", "register_type": "ir", "register_number": 601, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Instantaneous_SPM", "register_type": "ir", "register_number": 606, "scale_type": 0, "scale_multiplier": 10},
|
||||
{"tag_name": "kWh_Today", "register_type": "ir", "register_number": 611, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Max_Theoretical_Fluid_Load", "register_type": "ir", "register_number": 616, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Motor_Torque", "register_type": "ir", "register_number": 621, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "_Firmware_Rev", "register_type": "ir", "register_number": 1},
|
||||
{"tag_name": "_Program_Firmware", "register_type": "ir", "register_number": 2},
|
||||
{"tag_name": "Card_Past[1].Card_Type", "register_type": "ir", "register_number": 3},
|
||||
{"tag_name": "Card_Past[1].Downhole_AdjustedGrossStroke", "register_type": "ir", "register_number": 4},
|
||||
{"tag_name": "Card_Past[1].Downhole_FluidLoad", "register_type": "ir", "register_number": 6},
|
||||
{"tag_name": "Card_Past[1].Downhole_GrossStroke", "register_type": "ir", "register_number": 8},
|
||||
{"tag_name": "Card_Past[1].Downhole_Max_Load.Load", "register_type": "ir", "register_number": 10},
|
||||
{"tag_name": "Card_Past[1].Downhole_Max_Position.Position", "register_type": "ir", "register_number": 12},
|
||||
{"tag_name": "Card_Past[1].Downhole_Min_Load.Load", "register_type": "ir", "register_number": 14},
|
||||
{"tag_name": "Card_Past[1].Downhole_Min_Position.Position", "register_type": "ir", "register_number": 16},
|
||||
{"tag_name": "Card_Past[1].Downhole_NetStroke", "register_type": "ir", "register_number": 18},
|
||||
{"tag_name": "Card_Past[1].Fillage_Percent", "register_type": "ir", "register_number": 20},
|
||||
{"tag_name": "Card_Past[1].Fluid_Above_Pump", "register_type": "ir", "register_number": 22},
|
||||
{"tag_name": "Card_Past[1].Fluid_Moved", "register_type": "ir", "register_number": 24},
|
||||
{"tag_name": "Card_Past[1].ID", "register_type": "ir", "register_number": 26},
|
||||
{"tag_name": "Card_Past[1].Num_Points", "register_type": "ir", "register_number": 27},
|
||||
{"tag_name": "Card_Past[1].Polished_Rod_HP", "register_type": "ir", "register_number": 28},
|
||||
{"tag_name": "Card_Past[1].Pump_HP", "register_type": "ir", "register_number": 30},
|
||||
{"tag_name": "Card_Past[1].Pump_Intake_Pressure", "register_type": "ir", "register_number": 32},
|
||||
{"tag_name": "Card_Past[1].SPM", "register_type": "ir", "register_number": 34},
|
||||
{"tag_name": "Card_Past[1].Surface_Max.Load", "register_type": "ir", "register_number": 36},
|
||||
{"tag_name": "Card_Past[1].Surface_Max.Position", "register_type": "ir", "register_number": 38},
|
||||
{"tag_name": "Card_Past[1].Surface_Min.Load", "register_type": "ir", "register_number": 40},
|
||||
{"tag_name": "Card_Past[1].Surface_Min.Position", "register_type": "ir", "register_number": 42},
|
||||
{"tag_name": "Card_Past[1].Surface_StrokeLength", "register_type": "ir", "register_number": 44},
|
||||
{"tag_name": "Card_Past[1].Tubing_Movement", "register_type": "ir", "register_number": 46},
|
||||
{"tag_name": "Card_Past[2].Card_Type", "register_type": "ir", "register_number": 48},
|
||||
{"tag_name": "Card_Past[2].Downhole_AdjustedGrossStroke", "register_type": "ir", "register_number": 49},
|
||||
{"tag_name": "Card_Past[2].Downhole_FluidLoad", "register_type": "ir", "register_number": 51},
|
||||
{"tag_name": "Card_Past[2].Downhole_GrossStroke", "register_type": "ir", "register_number": 53},
|
||||
{"tag_name": "Card_Past[2].Downhole_Max_Load.Load", "register_type": "ir", "register_number": 55},
|
||||
{"tag_name": "Card_Past[2].Downhole_Max_Position.Position", "register_type": "ir", "register_number": 57},
|
||||
{"tag_name": "Card_Past[2].Downhole_Min_Load.Load", "register_type": "ir", "register_number": 59},
|
||||
{"tag_name": "Card_Past[2].Downhole_Min_Position.Position", "register_type": "ir", "register_number": 61},
|
||||
{"tag_name": "Card_Past[2].Downhole_NetStroke", "register_type": "ir", "register_number": 63},
|
||||
{"tag_name": "Card_Past[2].Fillage_Percent", "register_type": "ir", "register_number": 65},
|
||||
{"tag_name": "Card_Past[2].Fluid_Above_Pump", "register_type": "ir", "register_number": 67},
|
||||
{"tag_name": "Card_Past[2].Fluid_Moved", "register_type": "ir", "register_number": 69},
|
||||
{"tag_name": "Card_Past[2].ID", "register_type": "ir", "register_number": 71},
|
||||
{"tag_name": "Card_Past[2].Num_Points", "register_type": "ir", "register_number": 72},
|
||||
{"tag_name": "Card_Past[2].Polished_Rod_HP", "register_type": "ir", "register_number": 73},
|
||||
{"tag_name": "Card_Past[2].Pump_HP", "register_type": "ir", "register_number": 75},
|
||||
{"tag_name": "Card_Past[2].Pump_Intake_Pressure", "register_type": "ir", "register_number": 77},
|
||||
{"tag_name": "Card_Past[2].SPM", "register_type": "ir", "register_number": 79},
|
||||
{"tag_name": "Card_Past[2].Surface_Max.Load", "register_type": "ir", "register_number": 81},
|
||||
{"tag_name": "Card_Past[2].Surface_Max.Position", "register_type": "ir", "register_number": 83},
|
||||
{"tag_name": "Card_Past[2].Surface_Min.Load", "register_type": "ir", "register_number": 85},
|
||||
{"tag_name": "Card_Past[2].Surface_Min.Position", "register_type": "ir", "register_number": 87},
|
||||
{"tag_name": "Card_Past[2].Surface_StrokeLength", "register_type": "ir", "register_number": 89},
|
||||
{"tag_name": "Card_Past[2].Tubing_Movement", "register_type": "ir", "register_number": 91},
|
||||
{"tag_name": "Card_Past[3].Card_Type", "register_type": "ir", "register_number": 93},
|
||||
{"tag_name": "Card_Past[3].Downhole_AdjustedGrossStroke", "register_type": "ir", "register_number": 94},
|
||||
{"tag_name": "Card_Past[3].Downhole_FluidLoad", "register_type": "ir", "register_number": 96},
|
||||
{"tag_name": "Card_Past[3].Downhole_GrossStroke", "register_type": "ir", "register_number": 98},
|
||||
{"tag_name": "Card_Past[3].Downhole_Max_Load.Load", "register_type": "ir", "register_number": 100},
|
||||
{"tag_name": "Card_Past[3].Downhole_Max_Position.Position", "register_type": "ir", "register_number": 102},
|
||||
{"tag_name": "Card_Past[3].Downhole_Min_Load.Load", "register_type": "ir", "register_number": 104},
|
||||
{"tag_name": "Card_Past[3].Downhole_Min_Position.Position", "register_type": "ir", "register_number": 106},
|
||||
{"tag_name": "Card_Past[3].Downhole_NetStroke", "register_type": "ir", "register_number": 108},
|
||||
{"tag_name": "Card_Past[3].Fillage_Percent", "register_type": "ir", "register_number": 110},
|
||||
{"tag_name": "Card_Past[3].Fluid_Above_Pump", "register_type": "ir", "register_number": 112},
|
||||
{"tag_name": "Card_Past[3].Fluid_Moved", "register_type": "ir", "register_number": 114},
|
||||
{"tag_name": "Card_Past[3].ID", "register_type": "ir", "register_number": 116},
|
||||
{"tag_name": "Card_Past[3].Num_Points", "register_type": "ir", "register_number": 117},
|
||||
{"tag_name": "Card_Past[3].Polished_Rod_HP", "register_type": "ir", "register_number": 118},
|
||||
{"tag_name": "Card_Past[3].Pump_HP", "register_type": "ir", "register_number": 120},
|
||||
{"tag_name": "Card_Past[3].Pump_Intake_Pressure", "register_type": "ir", "register_number": 122},
|
||||
{"tag_name": "Card_Past[3].SPM", "register_type": "ir", "register_number": 124},
|
||||
{"tag_name": "Card_Past[3].Surface_Max.Load", "register_type": "ir", "register_number": 126},
|
||||
{"tag_name": "Card_Past[3].Surface_Max.Position", "register_type": "ir", "register_number": 128},
|
||||
{"tag_name": "Card_Past[3].Surface_Min.Load", "register_type": "ir", "register_number": 130},
|
||||
{"tag_name": "Card_Past[3].Surface_Min.Position", "register_type": "ir", "register_number": 132},
|
||||
{"tag_name": "Card_Past[3].Surface_StrokeLength", "register_type": "ir", "register_number": 134},
|
||||
{"tag_name": "Card_Past[3].Tubing_Movement", "register_type": "ir", "register_number": 136},
|
||||
{"tag_name": "Card_Past[4].Card_Type", "register_type": "ir", "register_number": 138},
|
||||
{"tag_name": "Card_Past[4].Downhole_AdjustedGrossStroke", "register_type": "ir", "register_number": 139},
|
||||
{"tag_name": "Card_Past[4].Downhole_FluidLoad", "register_type": "ir", "register_number": 141},
|
||||
{"tag_name": "Card_Past[4].Downhole_GrossStroke", "register_type": "ir", "register_number": 143},
|
||||
{"tag_name": "Card_Past[4].Downhole_Max_Load.Load", "register_type": "ir", "register_number": 145},
|
||||
{"tag_name": "Card_Past[4].Downhole_Max_Position.Position", "register_type": "ir", "register_number": 147},
|
||||
{"tag_name": "Card_Past[4].Downhole_Min_Load.Load", "register_type": "ir", "register_number": 149},
|
||||
{"tag_name": "Card_Past[4].Downhole_Min_Position.Position", "register_type": "ir", "register_number": 151},
|
||||
{"tag_name": "Card_Past[4].Downhole_NetStroke", "register_type": "ir", "register_number": 153},
|
||||
{"tag_name": "Card_Past[4].Fillage_Percent", "register_type": "ir", "register_number": 155},
|
||||
{"tag_name": "Card_Past[4].Fluid_Above_Pump", "register_type": "ir", "register_number": 157},
|
||||
{"tag_name": "Card_Past[4].Fluid_Moved", "register_type": "ir", "register_number": 159},
|
||||
{"tag_name": "Card_Past[4].ID", "register_type": "ir", "register_number": 161},
|
||||
{"tag_name": "Card_Past[4].Num_Points", "register_type": "ir", "register_number": 162},
|
||||
{"tag_name": "Card_Past[4].Polished_Rod_HP", "register_type": "ir", "register_number": 163},
|
||||
{"tag_name": "Card_Past[4].Pump_HP", "register_type": "ir", "register_number": 165},
|
||||
{"tag_name": "Card_Past[4].Pump_Intake_Pressure", "register_type": "ir", "register_number": 167},
|
||||
{"tag_name": "Card_Past[4].SPM", "register_type": "ir", "register_number": 169},
|
||||
{"tag_name": "Card_Past[4].Surface_Max.Load", "register_type": "ir", "register_number": 171},
|
||||
{"tag_name": "Card_Past[4].Surface_Max.Position", "register_type": "ir", "register_number": 173},
|
||||
{"tag_name": "Card_Past[4].Surface_Min.Load", "register_type": "ir", "register_number": 175},
|
||||
{"tag_name": "Card_Past[4].Surface_Min.Position", "register_type": "ir", "register_number": 177},
|
||||
{"tag_name": "Card_Past[4].Surface_StrokeLength", "register_type": "ir", "register_number": 179},
|
||||
{"tag_name": "Card_Past[4].Tubing_Movement", "register_type": "ir", "register_number": 181},
|
||||
{"tag_name": "Drive_Speed_Reference_SP", "register_type": "ir", "register_number": 183},
|
||||
{"tag_name": "Drive_Torque_Percent", "register_type": "ir", "register_number": 185},
|
||||
{"tag_name": "GAUGEOFF_Average_SPM", "register_type": "ir", "register_number": 187},
|
||||
{"tag_name": "GAUGEOFF_Downhole_GrossStroke", "register_type": "ir", "register_number": 189},
|
||||
{"tag_name": "GAUGEOFF_Downhole_NetStroke", "register_type": "ir", "register_number": 191},
|
||||
{"tag_name": "GAUGEOFF_Electricity_Cost", "register_type": "ir", "register_number": 193},
|
||||
{"tag_name": "GAUGEOFF_Fluid_Above_Pump", "register_type": "ir", "register_number": 195},
|
||||
{"tag_name": "GAUGEOFF_Inflow_Rate", "register_type": "ir", "register_number": 197},
|
||||
{"tag_name": "GAUGEOFF_kWh", "register_type": "ir", "register_number": 199},
|
||||
{"tag_name": "GAUGEOFF_kWh_Regen", "register_type": "ir", "register_number": 201},
|
||||
{"tag_name": "GAUGEOFF_Lifting_Cost", "register_type": "ir", "register_number": 203},
|
||||
{"tag_name": "GAUGEOFF_Max_Load", "register_type": "ir", "register_number": 205},
|
||||
{"tag_name": "GAUGEOFF_Min_Load", "register_type": "ir", "register_number": 207},
|
||||
{"tag_name": "GAUGEOFF_Percent_Run", "register_type": "ir", "register_number": 209},
|
||||
{"tag_name": "GAUGEOFF_Polished_Rod_HP", "register_type": "ir", "register_number": 211},
|
||||
{"tag_name": "GAUGEOFF_Pump_Intake_Pressure", "register_type": "ir", "register_number": 213},
|
||||
{"tag_name": "GAUGEOFF_Surface_StrokeLength", "register_type": "ir", "register_number": 215},
|
||||
{"tag_name": "GAUGEOFF_Tubing_Movement", "register_type": "ir", "register_number": 217},
|
||||
{"tag_name": "Gearbox_Loading", "register_type": "ir", "register_number": 219},
|
||||
{"tag_name": "Gearbox_Torque", "register_type": "ir", "register_number": 221},
|
||||
{"tag_name": "Input_Analog_1_AIN.Val", "register_type": "ir", "register_number": 223},
|
||||
{"tag_name": "Input_Analog_2_AIN.Val", "register_type": "ir", "register_number": 225},
|
||||
{"tag_name": "Input_Analog_3_AIN.Val", "register_type": "ir", "register_number": 227},
|
||||
{"tag_name": "Instantaneous_SPM", "register_type": "ir", "register_number": 229},
|
||||
{"tag_name": "kWh_Today", "register_type": "ir", "register_number": 231},
|
||||
{"tag_name": "Max_Theoretical_Fluid_Load", "register_type": "ir", "register_number": 233},
|
||||
{"tag_name": "Motor_Torque", "register_type": "ir", "register_number": 235},
|
||||
|
||||
{"tag_name": "_dt", "register_type": "hr", "register_number": 1, "scale_type": 0, "scale_multiplier": 1000},
|
||||
{"tag_name": "Casing_ID", "register_type": "hr", "register_number": 6, "scale_type": 0, "scale_multiplier": 1000},
|
||||
{"tag_name": "Drive_Start_Speed", "register_type": "hr", "register_number": 11, "scale_type": 0, "scale_multiplier": 10},
|
||||
{"tag_name": "Electricity_Cost", "register_type": "hr", "register_number": 16, "scale_type": 0, "scale_multiplier": 1000},
|
||||
{"tag_name": "Estimated_Tubing_Movement", "register_type": "hr", "register_number": 21, "scale_type": 0, "scale_multiplier": 100},
|
||||
{"tag_name": "Fluid_Gradient", "register_type": "hr", "register_number": 26, "scale_type": 0, "scale_multiplier": 1000},
|
||||
{"tag_name": "Friction", "register_type": "hr", "register_number": 31, "scale_type": 0, "scale_multiplier": 10},
|
||||
{"tag_name": "Gauge_Off_Time.Hour", "register_type": "hr", "register_number": 36, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Gauge_Off_Time.Min", "register_type": "hr", "register_number": 41, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Input_Analog_1_AIN.Cfg_PVEUMax", "register_type": "hr", "register_number": 46, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Input_Analog_1_AIN.Cfg_PVEUMin", "register_type": "hr", "register_number": 51, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Input_Analog_2_AIN.Cfg_PVEUMax", "register_type": "hr", "register_number": 56, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Input_Analog_2_AIN.Cfg_PVEUMin", "register_type": "hr", "register_number": 61, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Input_Analog_3_AIN.Cfg_PVEUMax", "register_type": "hr", "register_number": 66, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Input_Analog_3_AIN.Cfg_PVEUMin", "register_type": "hr", "register_number": 71, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Input_Inclinometer_AIN.Cfg_PVEUMax", "register_type": "hr", "register_number": 76, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Input_Inclinometer_AIN.Cfg_PVEUMin", "register_type": "hr", "register_number": 81, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Input_LoadCell_AIN.Cfg_PVEUMax", "register_type": "hr", "register_number": 86, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "Input_LoadCell_AIN.Cfg_PVEUMin", "register_type": "hr", "register_number": 91, "scale_type": 0, "scale_multiplier": 1},
|
||||
{"tag_name": "K_Factor", "register_type": "hr", "register_number": 96, "scale_type": 0, "scale_multiplier": 1000},
|
||||
{"tag_name": "Min_Fluid_Load_Shutdown_Setpoint", "register_type": "hr", "register_number": 101, "scale_type": 0, "scale_multiplier": 1}
|
||||
{"tag_name": "_dt", "register_type": "hr", "register_number": 1},
|
||||
{"tag_name": "Casing_ID", "register_type": "hr", "register_number": 3},
|
||||
{"tag_name": "Drive_Start_Speed", "register_type": "hr", "register_number": 5},
|
||||
{"tag_name": "Electricity_Cost", "register_type": "hr", "register_number": 7},
|
||||
{"tag_name": "Estimated_Tubing_Movement", "register_type": "hr", "register_number": 9},
|
||||
{"tag_name": "Fluid_Gradient", "register_type": "hr", "register_number": 11},
|
||||
{"tag_name": "Friction", "register_type": "hr", "register_number": 13},
|
||||
{"tag_name": "Gauge_Off_Time.Hour", "register_type": "hr", "register_number": 15},
|
||||
{"tag_name": "Gauge_Off_Time.Min", "register_type": "hr", "register_number": 16},
|
||||
{"tag_name": "Input_Analog_1_AIN.Cfg_PVEUMax", "register_type": "hr", "register_number": 17},
|
||||
{"tag_name": "Input_Analog_1_AIN.Cfg_PVEUMin", "register_type": "hr", "register_number": 19},
|
||||
{"tag_name": "Input_Analog_2_AIN.Cfg_PVEUMax", "register_type": "hr", "register_number": 21},
|
||||
{"tag_name": "Input_Analog_2_AIN.Cfg_PVEUMin", "register_type": "hr", "register_number": 23},
|
||||
{"tag_name": "Input_Analog_3_AIN.Cfg_PVEUMax", "register_type": "hr", "register_number": 25},
|
||||
{"tag_name": "Input_Analog_3_AIN.Cfg_PVEUMin", "register_type": "hr", "register_number": 27},
|
||||
{"tag_name": "Input_Inclinometer_AIN.Cfg_PVEUMax", "register_type": "hr", "register_number": 29},
|
||||
{"tag_name": "Input_Inclinometer_AIN.Cfg_PVEUMin", "register_type": "hr", "register_number": 31},
|
||||
{"tag_name": "Input_LoadCell_AIN.Cfg_PVEUMax", "register_type": "hr", "register_number": 33},
|
||||
{"tag_name": "Input_LoadCell_AIN.Cfg_PVEUMin", "register_type": "hr", "register_number": 35},
|
||||
{"tag_name": "K_Factor", "register_type": "hr", "register_number": 37},
|
||||
{"tag_name": "Min_Fluid_Load_Shutdown_Setpoint", "register_type": "hr", "register_number": 39},
|
||||
{"tag_name": "Input_Analog_1.Channel", "register_type": "hr", "register_number": 41},
|
||||
{"tag_name": "Input_Analog_1.Type", "register_type": "hr", "register_number": 42},
|
||||
{"tag_name": "Input_Analog_2.Channel", "register_type": "hr", "register_number": 43},
|
||||
{"tag_name": "Input_Analog_2.Type", "register_type": "hr", "register_number": 44},
|
||||
{"tag_name": "Input_Analog_3.Channel", "register_type": "hr", "register_number": 45},
|
||||
{"tag_name": "Input_Analog_3.Type", "register_type": "hr", "register_number": 46},
|
||||
{"tag_name": "Input_Inclinometer.Channel", "register_type": "hr", "register_number": 47},
|
||||
{"tag_name": "Input_Inclinometer.Type", "register_type": "hr", "register_number": 48},
|
||||
{"tag_name": "Input_LoadCell.Channel", "register_type": "hr", "register_number": 49},
|
||||
{"tag_name": "Input_LoadCell.Type", "register_type": "hr", "register_number": 50}
|
||||
]
|
||||
|
||||
@@ -1,4 +1,19 @@
|
||||
|
||||
[
|
||||
|
||||
{"tag_name": "Card_Past[1].Surface_Position", "register_type": "ir", "register_number": 237, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[2].Surface_Position", "register_type": "ir", "register_number": 1737, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[3].Surface_Position", "register_type": "ir", "register_number": 3237, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[4].Surface_Position", "register_type": "ir", "register_number": 4737, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[1].Surface_Load", "register_type": "ir", "register_number": 6237, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[2].Surface_Load", "register_type": "ir", "register_number": 7737, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[3].Surface_Load", "register_type": "ir", "register_number": 9237, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[4].Surface_Load", "register_type": "ir", "register_number": 10737, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[1].Downhole_Position", "register_type": "ir", "register_number": 12237, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[2].Downhole_Position", "register_type": "ir", "register_number": 13737, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[3].Downhole_Position", "register_type": "ir", "register_number": 15237, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[4].Downhole_Position", "register_type": "ir", "register_number": 16737, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[1].Downhole_Load", "register_type": "ir", "register_number": 18237, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[2].Downhole_Load", "register_type": "ir", "register_number": 19737, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[3].Downhole_Load", "register_type": "ir", "register_number": 21237, "arr_len": 750},
|
||||
{"tag_name": "Card_Past[4].Downhole_Load", "register_type": "ir", "register_number": 22737, "arr_len": 750}
|
||||
]
|
||||
|
||||
34
digital.json
34
digital.json
@@ -4,28 +4,18 @@
|
||||
{"tag_name": "Gas_Interference_Override_Enabled", "register_type": "co", "register_number": 3},
|
||||
{"tag_name": "Gauge_Off_Manual", "register_type": "co", "register_number": 4},
|
||||
{"tag_name": "Initialize", "register_type": "co", "register_number": 5},
|
||||
{"tag_name": "Input_Analog_1.Channel", "register_type": "co", "register_number": 6},
|
||||
{"tag_name": "Input_Analog_1.Enabled", "register_type": "co", "register_number": 7},
|
||||
{"tag_name": "Input_Analog_1.Type", "register_type": "co", "register_number": 8},
|
||||
{"tag_name": "Input_Analog_2.Channel", "register_type": "co", "register_number": 9},
|
||||
{"tag_name": "Input_Analog_2.Enabled", "register_type": "co", "register_number": 10},
|
||||
{"tag_name": "Input_Analog_2.Type", "register_type": "co", "register_number": 11},
|
||||
{"tag_name": "Input_Analog_3.Channel", "register_type": "co", "register_number": 12},
|
||||
{"tag_name": "Input_Analog_3.Enabled", "register_type": "co", "register_number": 13},
|
||||
{"tag_name": "Input_Analog_3.Type", "register_type": "co", "register_number": 14},
|
||||
{"tag_name": "Input_Inclinometer_Calibrate", "register_type": "co", "register_number": 15},
|
||||
{"tag_name": "Input_Inclinometer.Channel", "register_type": "co", "register_number": 16},
|
||||
{"tag_name": "Input_Inclinometer.Enabled", "register_type": "co", "register_number": 17},
|
||||
{"tag_name": "Input_Inclinometer.Type", "register_type": "co", "register_number": 18},
|
||||
{"tag_name": "Input_LoadCell.Channel", "register_type": "co", "register_number": 19},
|
||||
{"tag_name": "Input_LoadCell.Enabled", "register_type": "co", "register_number": 20},
|
||||
{"tag_name": "Input_LoadCell.Type", "register_type": "co", "register_number": 21},
|
||||
{"tag_name": "Min_Fluid_Load_Shutdown_Enabled", "register_type": "co", "register_number": 22},
|
||||
{"tag_name": "Restart_After_Fault_Allowed", "register_type": "co", "register_number": 23},
|
||||
{"tag_name": "Update_Tapers", "register_type": "co", "register_number": 24},
|
||||
{"tag_name": "USE_WIRELESS_LOADCELL", "register_type": "co", "register_number": 25},
|
||||
{"tag_name": "Write_Mode_Data", "register_type": "co", "register_number": 26},
|
||||
{"tag_name": "Write_Setup_Data", "register_type": "co", "register_number": 27},
|
||||
{"tag_name": "Input_Analog_1.Enabled", "register_type": "co", "register_number": 6},
|
||||
{"tag_name": "Input_Analog_2.Enabled", "register_type": "co", "register_number": 7},
|
||||
{"tag_name": "Input_Analog_3.Enabled", "register_type": "co", "register_number": 8},
|
||||
{"tag_name": "Input_Inclinometer_Calibrate", "register_type": "co", "register_number": 9},
|
||||
{"tag_name": "Input_Inclinometer.Enabled", "register_type": "co", "register_number": 10},
|
||||
{"tag_name": "Input_LoadCell.Enabled", "register_type": "co", "register_number": 11},
|
||||
{"tag_name": "Min_Fluid_Load_Shutdown_Enabled", "register_type": "co", "register_number": 12},
|
||||
{"tag_name": "Restart_After_Fault_Allowed", "register_type": "co", "register_number": 13},
|
||||
{"tag_name": "Update_Tapers", "register_type": "co", "register_number": 14},
|
||||
{"tag_name": "USE_WIRELESS_LOADCELL", "register_type": "co", "register_number": 15},
|
||||
{"tag_name": "Write_Mode_Data", "register_type": "co", "register_number": 16},
|
||||
{"tag_name": "Write_Setup_Data", "register_type": "co", "register_number": 17},
|
||||
{"tag_name": "Inclinometer_Calibrating", "register_type": "di", "register_number": 1},
|
||||
{"tag_name": "Inclinometer_Stale", "register_type": "di", "register_number": 2}
|
||||
]
|
||||
|
||||
@@ -21,7 +21,7 @@ def main():
|
||||
digital_list = json.loads(digitalfile.read())
|
||||
|
||||
with open('arraylist.json', 'rb') as arrayfile:
|
||||
arr_list = [] # json.loads(arrayfile.read())
|
||||
arr_list = json.loads(arrayfile.read())
|
||||
|
||||
for entry in analog_list + digital_list + arr_list:
|
||||
if tag_vals.find({'tag_name': entry['tag_name']}).count() < 1:
|
||||
@@ -34,14 +34,10 @@ def main():
|
||||
plc_val = plc.readTag(PLC_IP_ADDRESS, t['tag_name'])
|
||||
if plc_val:
|
||||
t['tag_type'] = plc_val[1]
|
||||
t['val_actual'] = plc_val[0]
|
||||
t['val'] = plc_val[0]
|
||||
t['timestamp'] = now()
|
||||
if int(t['scale_type']) == 0:
|
||||
t['val'] = int(plc_val[0] * t['scale_multiplier'])
|
||||
else:
|
||||
t['val'] = int(plc_val[0] / t['scale_multiplier'])
|
||||
tag_vals.update({'tag_name': t['tag_name']}, t)
|
||||
print("Updated: {}".format(tag_vals.find({'tag_name': t['tag_name']})[0]))
|
||||
print("Updated: {} - {}".format(t['tag_name'], t['val']))
|
||||
except Exception as e:
|
||||
print("[ERROR] {} - {}".format(t['tag_name'], e))
|
||||
|
||||
@@ -53,19 +49,19 @@ def main():
|
||||
t['val'] = plc_val[0]
|
||||
t['timestamp'] = now()
|
||||
tag_vals.update({'tag_name': t['tag_name']}, t)
|
||||
print("Updated: {}".format(tag_vals.find({'tag_name': t['tag_name']})[0]))
|
||||
print("Updated: {} - {}".format(t['tag_name'], t['val']))
|
||||
except Exception as e:
|
||||
print("[ERROR] {} - {}".format(t['tag_name'], e))
|
||||
|
||||
for a in arr_list:
|
||||
try:
|
||||
plc_val = plc.readArray(PLC_IP_ADDRESS, str(a['tag_name']), int(a['length']))
|
||||
plc_val = plc.readArray(PLC_IP_ADDRESS, str(a['tag_name']), int(a['arr_len']))
|
||||
if plc_val:
|
||||
a['val'] = plc_val
|
||||
a['tag_type'] = 'ARRAY'
|
||||
t['timestamp'] = now()
|
||||
tag_vals.update({'tag_name': a['tag_name']}, a)
|
||||
print("Updated: {}".format(tag_vals.find({'tag_name': a['tag_name']})[0]))
|
||||
print("Updated: {} - {}".format(a['tag_name'], a['val']))
|
||||
except Exception as e:
|
||||
print("[ERROR] {} - {}".format(a['tag_name'], e))
|
||||
|
||||
|
||||
102
poc_to_modbus.py
102
poc_to_modbus.py
@@ -1,11 +1,9 @@
|
||||
#!/usr/bin/env python
|
||||
'''
|
||||
Pymodbus Server With Callbacks
|
||||
Pymodbus Server from MongoDB
|
||||
--------------------------------------------------------------------------
|
||||
|
||||
This is an example of adding callbacks to a running modbus server
|
||||
when a value is written to it. In order for this to work, it needs
|
||||
a device-mapping file.
|
||||
This program takes the values in a mongo database and exposes them over Modbus/TCP
|
||||
'''
|
||||
# ---------------------------------------------------------------------------#
|
||||
# import the modbus libraries we need
|
||||
@@ -15,7 +13,6 @@ from pymodbus.device import ModbusDeviceIdentification
|
||||
from pymodbus.datastore import ModbusSparseDataBlock
|
||||
from pymodbus.datastore import ModbusSlaveContext, ModbusServerContext
|
||||
from pymodbus.transaction import ModbusRtuFramer, ModbusAsciiFramer
|
||||
from pymodbus.payload import BinaryPayloadBuilder
|
||||
from pymodbus.constants import Endian
|
||||
|
||||
# ---------------------------------------------------------------------------#
|
||||
@@ -25,20 +22,34 @@ import pymongo
|
||||
from pymongo import MongoClient
|
||||
from pycomm_helper import utils as plc
|
||||
from time import time as now
|
||||
import struct
|
||||
# ---------------------------------------------------------------------------#
|
||||
# configure the service logging
|
||||
# ---------------------------------------------------------------------------#
|
||||
import logging
|
||||
logging.basicConfig()
|
||||
log = logging.getLogger()
|
||||
log.setLevel(logging.DEBUG)
|
||||
log.setLevel(logging.INFO)
|
||||
|
||||
PLC_IP_ADDRESS = '10.20.4.7'
|
||||
|
||||
# ---------------------------------------------------------------------------#
|
||||
# Datatype Mapping
|
||||
# ---------------------------------------------------------------------------#
|
||||
|
||||
def float_to_bytes(float_val):
|
||||
'''
|
||||
Converts a float to little-endian bytes
|
||||
'''
|
||||
packed_string = struct.pack('f', float_val)
|
||||
unpacked_list = list(struct.unpack('HH', packed_string))
|
||||
return unpacked_list
|
||||
|
||||
|
||||
def integer_to_byte(integer_val):
|
||||
'''
|
||||
Converts an integer to its byte
|
||||
'''
|
||||
packed_string = struct.pack('h', integer_val)
|
||||
unpacked = list(struct.unpack('H', packed_string))
|
||||
return unpacked
|
||||
|
||||
|
||||
def getTagsFromDB():
|
||||
@@ -93,19 +104,14 @@ class DigitalTagDataBlock(ModbusSparseDataBlock):
|
||||
super(DigitalTagDataBlock, self).__init__(values)
|
||||
|
||||
def getValues(self, address, count=1):
|
||||
client = MongoClient()
|
||||
db = client.tag_data
|
||||
tags = db.tag_vals
|
||||
|
||||
if count > 1:
|
||||
for i in range(address, address + count):
|
||||
tag_found = tags.find_one({'register_number': i, 'register_type': self.register_type})
|
||||
print("{} = {}".format(tag_found['tag_name'], tag_found['val']))
|
||||
super(DigitalTagDataBlock, self).setValues(address, tag_found['val'])
|
||||
else:
|
||||
tag_found = tags.find_one({'register_number': address, 'register_type': self.register_type})
|
||||
print("{} = {}".format(tag_found['tag_name'], tag_found['val']))
|
||||
super(DigitalTagDataBlock, self).setValues(address, tag_found['val'])
|
||||
# client = MongoClient()
|
||||
# db = client.tag_data
|
||||
# tags = db.tag_vals
|
||||
#
|
||||
# for i in range(address, address + count):
|
||||
# tag_found = tags.find_one({'register_number': i, 'register_type': self.register_type})
|
||||
# print("{} = {}".format(tag_found['tag_name'], tag_found['val']))
|
||||
# super(DigitalTagDataBlock, self).setValues(address, tag_found['val'])
|
||||
|
||||
return super(DigitalTagDataBlock, self).getValues(address, count=count)
|
||||
|
||||
@@ -133,50 +139,56 @@ class AnalogTagDataBlock(ModbusSparseDataBlock):
|
||||
'''
|
||||
values = {}
|
||||
self.register_type = register_type
|
||||
register_values = {}
|
||||
register_values = []
|
||||
for t in tag_list:
|
||||
builder = BinaryPayloadBuilder(endian=Endian.Little)
|
||||
try:
|
||||
if t['tag_type'] == 'SINT':
|
||||
builder.add_8bit_int(t['val_actual'])
|
||||
elif t['tag_type'][:3] == 'INT':
|
||||
builder.add_16bit_int(t['val_actual'])
|
||||
if t['tag_type'][-3:] == 'INT':
|
||||
register_values.append({"r_num": t['register_number'], "r_vals": integer_to_byte(t['val'])})
|
||||
elif t['tag_type'] == 'REAL':
|
||||
builder.add_32bit_float(t['val_actual'])
|
||||
|
||||
register_values[t['register_number']] = builder.to_registers
|
||||
register_values.append({"r_num": t['register_number'], "r_vals": float_to_bytes(t['val'])})
|
||||
elif t['tag_type'] == 'ARRAY':
|
||||
arr_vals = []
|
||||
for i in range(0, len(t['val'])):
|
||||
arr_vals = arr_vals + float_to_bytes(t['val'][i])
|
||||
register_values.append({"r_num": t['register_number'], "r_vals": arr_vals})
|
||||
except KeyError:
|
||||
register_values[t['register_number']] = []
|
||||
print("No value for register #{} - {}".format(t['register_number'], t['tag_name']))
|
||||
|
||||
|
||||
register_values.sort(key=lambda x: x['r_num'])
|
||||
values = [0]
|
||||
for x in register_values:
|
||||
values = values + x['r_vals']
|
||||
|
||||
# print("Initialized AnalogTagDataBlock for {} with values {}".format(self.register_type, values))
|
||||
super(AnalogTagDataBlock, self).__init__(values)
|
||||
|
||||
def getValues(self, address, count=1):
|
||||
client = MongoClient()
|
||||
db = client.tag_data
|
||||
tags = db.tag_vals
|
||||
|
||||
if count > 1:
|
||||
try:
|
||||
for i in range(address, address + count):
|
||||
tag_found = tags.find_one({'register_number': i, 'register_type': self.register_type})
|
||||
val_registers = []
|
||||
if tag_found:
|
||||
if tag_found['tag_type'][-3:] == 'INT':
|
||||
val_registers = integer_to_byte(tag_found['val'])
|
||||
elif tag_found['tag_type'] == 'REAL':
|
||||
val_registers = float_to_bytes(tag_found['val'])
|
||||
elif tag_found['tag_type'] == 'ARRAY':
|
||||
val_registers = []
|
||||
for k in range(0, len(tag_found['val'])):
|
||||
val_registers = val_registers + float_to_bytes(tag_found['val'][k])
|
||||
for j in range(0, len(val_registers)):
|
||||
super(AnalogTagDataBlock, self).setValues(i + j, val_registers[j])
|
||||
print("{} = {}".format(tag_found['tag_name'], tag_found['val']))
|
||||
super(AnalogTagDataBlock, self).setValues(address, tag_found['val'])
|
||||
super(AnalogTagDataBlock, self).setValues(address + 3, 0)
|
||||
else:
|
||||
tag_found = tags.find_one({'register_number': address, 'register_type': self.register_type})
|
||||
if tag_found:
|
||||
print("{} = {}".format(tag_found['tag_name'], tag_found['val']))
|
||||
super(AnalogTagDataBlock, self).setValues(address, tag_found['val'])
|
||||
super(AnalogTagDataBlock, self).setValues(address + 3, 0)
|
||||
except Exception as e:
|
||||
print(e)
|
||||
|
||||
return super(AnalogTagDataBlock, self).getValues(address, count=count)
|
||||
|
||||
def setValues(self, address, value):
|
||||
''' Sets the requested values of the datastore
|
||||
'''
|
||||
Sets the requested values of the datastore
|
||||
|
||||
:param address: The starting address
|
||||
:param values: The new values to be set
|
||||
|
||||
177
test.py
177
test.py
@@ -10,6 +10,7 @@ from pymodbus.client.sync import ModbusTcpClient as ModbusClient
|
||||
# ---------------------------------------------------------------------------#
|
||||
from pymongo import MongoClient
|
||||
import unittest
|
||||
import struct
|
||||
|
||||
# ---------------------------------------------------------------------------#
|
||||
# configure the client logging
|
||||
@@ -44,44 +45,65 @@ def close_enough(a, b):
|
||||
return False
|
||||
|
||||
|
||||
def lebyte_to_float(word_list):
|
||||
'''
|
||||
Converts list of little-endian bytes to float
|
||||
'''
|
||||
packed_string = struct.pack("HH", *word_list)
|
||||
unpacked_float = struct.unpack("f", packed_string)[0]
|
||||
return unpacked_float
|
||||
|
||||
|
||||
def lebyte_to_integer(word_list):
|
||||
'''
|
||||
Converts list(size = 1) of little-endian bytes to Integer
|
||||
'''
|
||||
try:
|
||||
packed_string = struct.pack("H", *word_list)
|
||||
unpacked_int = struct.unpack("h", packed_string)[0]
|
||||
except Exception as e:
|
||||
print("Unable to convert {} to integer".format(word_list))
|
||||
return False
|
||||
return unpacked_int
|
||||
|
||||
|
||||
# ---------------------------------------------------------------------------#
|
||||
# specify slave to query
|
||||
# ---------------------------------------------------------------------------#
|
||||
class TestStringMethods(unittest.TestCase):
|
||||
class TestModbusDatabaseValues(unittest.TestCase):
|
||||
def test_holding_registers(self):
|
||||
modbus_client.connect()
|
||||
tag_in_db = mongo_tags.find({"register_type": 'hr'})
|
||||
for db_tag in tag_in_db:
|
||||
try:
|
||||
database_actual_value = float(db_tag['val_actual'])
|
||||
database_value = db_tag['val']
|
||||
if db_tag['scale_type'] == 0:
|
||||
database_calc_value = float(db_tag['val']) / float(db_tag['scale_multiplier'])
|
||||
else:
|
||||
database_calc_value = float(db_tag['val']) * float(db_tag['scale_multiplier'])
|
||||
except KeyError:
|
||||
print("No value in DB for {}".format(db_tag['tag_name']))
|
||||
|
||||
reg = []
|
||||
try:
|
||||
reg = modbus_client.read_holding_registers(db_tag['register_number'] - 1, 5).registers
|
||||
if db_tag['tag_type'][-3:] == 'INT':
|
||||
reg = modbus_client.read_holding_registers(db_tag['register_number'] - 1, 1).registers
|
||||
elif db_tag['tag_type'] == 'REAL':
|
||||
reg = modbus_client.read_holding_registers(db_tag['register_number'] - 1, 2).registers
|
||||
# print(reg)
|
||||
except AttributeError:
|
||||
print("Could not get register {} for {}".format(db_tag['register_number'], db_tag['tag_name']))
|
||||
self.assertTrue(1 == 0)
|
||||
next()
|
||||
continue
|
||||
if reg:
|
||||
modbus_value = reg[0]
|
||||
if int(reg[1]) == 0:
|
||||
modbus_actual_value = float(modbus_value) / float(reg[2])
|
||||
elif int(reg[1]) == 1:
|
||||
modbus_actual_value = float(modbus_value) * float(reg[2])
|
||||
if len(reg) == 2:
|
||||
# r = reg.reverse()
|
||||
modbus_value = lebyte_to_float(reg)
|
||||
else:
|
||||
modbus_value = lebyte_to_integer(reg)
|
||||
|
||||
# print("Modbus Actual: {}".format(modbus_actual_value))
|
||||
# print("Database Actual: {}".format(database_actual_value))
|
||||
# print("Database Calc: {}".format(database_calc_value))
|
||||
# print("Modbus Scaled: {}".format(modbus_value))
|
||||
# print("Database Scaled: {}".format(database_value))
|
||||
self.assertTrue(modbus_actual_value == database_calc_value)
|
||||
if not modbus_value == database_value:
|
||||
print("---- {}: {} ----".format(db_tag['tag_name'], db_tag['register_number']))
|
||||
print(reg)
|
||||
print("Modbus Scaled: {}".format(modbus_value))
|
||||
print("Database Scaled: {}".format(database_value))
|
||||
self.assertTrue(modbus_value == database_value)
|
||||
modbus_client.close()
|
||||
|
||||
@@ -90,37 +112,118 @@ class TestStringMethods(unittest.TestCase):
|
||||
tag_in_db = mongo_tags.find({"register_type": 'ir'})
|
||||
for db_tag in tag_in_db:
|
||||
try:
|
||||
database_actual_value = float(db_tag['val_actual'])
|
||||
database_value = db_tag['val']
|
||||
if db_tag['scale_type'] == 0:
|
||||
database_calc_value = float(db_tag['val']) / float(db_tag['scale_multiplier'])
|
||||
else:
|
||||
database_calc_value = float(db_tag['val']) * float(db_tag['scale_multiplier'])
|
||||
except KeyError:
|
||||
print("No value in DB for {}".format(db_tag['tag_name']))
|
||||
|
||||
reg = []
|
||||
try:
|
||||
reg = modbus_client.read_input_registers(db_tag['register_number'] - 1, 5).registers
|
||||
if db_tag['tag_type'][-3:] == 'INT':
|
||||
reg = modbus_client.read_input_registers(db_tag['register_number'] - 1, 1).registers
|
||||
elif db_tag['tag_type'] == 'REAL':
|
||||
reg = modbus_client.read_input_registers(db_tag['register_number'] - 1, 2).registers
|
||||
elif db_tag['tag_type'] == 'ARRAY':
|
||||
continue
|
||||
|
||||
# print(reg)
|
||||
except AttributeError:
|
||||
print("Could not get register {} for {}".format(db_tag['register_number'], db_tag['tag_name']))
|
||||
continue
|
||||
if reg:
|
||||
modbus_value = reg[0]
|
||||
if int(reg[1]) == 0:
|
||||
modbus_actual_value = float(modbus_value) / float(reg[2])
|
||||
elif int(reg[1]) == 1:
|
||||
modbus_actual_value = float(modbus_value) * float(reg[2])
|
||||
if len(reg) > 0:
|
||||
if len(reg) == 2:
|
||||
# r = reg.reverse()
|
||||
modbus_value = lebyte_to_float(reg)
|
||||
elif len(reg) == 1:
|
||||
modbus_value = lebyte_to_integer(reg)
|
||||
|
||||
# print("Modbus Actual: {}".format(modbus_actual_value))
|
||||
# print("Database Actual: {}".format(database_actual_value))
|
||||
# print("Database Calc: {}".format(database_calc_value))
|
||||
# print("Modbus Scaled: {}".format(modbus_value))
|
||||
# print("Database Scaled: {}".format(database_value))
|
||||
self.assertTrue(modbus_actual_value == database_calc_value)
|
||||
self.assertTrue(modbus_value == database_value)
|
||||
# print("Modbus Actual: {}".format(modbus_actual_value))
|
||||
# print("Database Actual: {}".format(database_actual_value))
|
||||
# print("Database Calc: {}".format(database_calc_value))
|
||||
if not modbus_value == database_value:
|
||||
print("---- {}: {} ----".format(db_tag['tag_name'], db_tag['register_number']))
|
||||
print(reg)
|
||||
print("Modbus Scaled: {}".format(modbus_value))
|
||||
print("Database Scaled: {}".format(database_value))
|
||||
self.assertTrue(modbus_value == database_value)
|
||||
modbus_client.close()
|
||||
|
||||
def test_arrays(self):
|
||||
modbus_client.connect()
|
||||
tag_in_db = mongo_tags.find({"register_type": 'ir'})
|
||||
for db_tag in tag_in_db:
|
||||
try:
|
||||
database_value = db_tag['val']
|
||||
except KeyError:
|
||||
print("No value in DB for {}".format(db_tag['tag_name']))
|
||||
reg = []
|
||||
array_values = []
|
||||
try:
|
||||
if db_tag['tag_type'] == 'ARRAY':
|
||||
array_regs = []
|
||||
db_vals = db_tag['val']
|
||||
reg_len = db_tag['arr_len'] * 2
|
||||
get_len = 125
|
||||
num_gets = int(reg_len) / get_len
|
||||
last_get = reg_len % get_len
|
||||
for x in range(0, num_gets):
|
||||
inp_register = (int(db_tag['register_number']) - 1) + (get_len * x)
|
||||
read_registers = modbus_client.read_input_registers(inp_register, get_len).registers
|
||||
array_regs = array_regs + read_registers
|
||||
if last_get > 0:
|
||||
array_regs = array_regs + modbus_client.read_input_registers((db_tag['register_number'] - 1) + (get_len * num_gets), last_get).registers
|
||||
|
||||
for i in range(0, reg_len, 2):
|
||||
array_values.append(lebyte_to_float([array_regs[i], array_regs[i + 1]]))
|
||||
else:
|
||||
continue
|
||||
|
||||
except AttributeError:
|
||||
print("Could not get register {} for {}".format(db_tag['register_number'], db_tag['tag_name']))
|
||||
continue
|
||||
if not array_values == db_vals:
|
||||
if len(array_values) > 0:
|
||||
for i in range(0, len(array_values)):
|
||||
print("{} = {} - {}".format(i, array_values[i], db_vals[i]))
|
||||
self.assertTrue(array_values == db_vals)
|
||||
modbus_client.close()
|
||||
|
||||
def test_coils(self):
|
||||
modbus_client.connect()
|
||||
tag_in_db = mongo_tags.find({"register_type": 'co'})
|
||||
for db_tag in tag_in_db:
|
||||
try:
|
||||
database_value = db_tag['val']
|
||||
except KeyError:
|
||||
print("No value in DB for {}".format(db_tag['tag_name']))
|
||||
|
||||
try:
|
||||
reg = modbus_client.read_coils(db_tag['register_number'] - 1, 1).bits
|
||||
if not database_value == reg[0]:
|
||||
print("{} =/= {}".format(database_value, reg[0]))
|
||||
self.assertTrue(database_value == reg[0])
|
||||
|
||||
except AttributeError:
|
||||
print("Could not get register {} for {}".format(db_tag['register_number'], db_tag['tag_name']))
|
||||
continue
|
||||
|
||||
def test_digital_inputs(self):
|
||||
modbus_client.connect()
|
||||
tag_in_db = mongo_tags.find({"register_type": 'di'})
|
||||
for db_tag in tag_in_db:
|
||||
try:
|
||||
database_value = db_tag['val']
|
||||
except KeyError:
|
||||
print("No value in DB for {}".format(db_tag['tag_name']))
|
||||
|
||||
try:
|
||||
reg = modbus_client.read_discrete_inputs(db_tag['register_number'] - 1, 1).bits
|
||||
if not database_value == reg[0]:
|
||||
print("{} =/= {}".format(database_value, reg[0]))
|
||||
self.assertTrue(database_value == reg[0])
|
||||
|
||||
except AttributeError:
|
||||
print("Could not get register {} for {}".format(db_tag['register_number'], db_tag['tag_name']))
|
||||
continue
|
||||
|
||||
if __name__ == '__main__':
|
||||
unittest.main()
|
||||
|
||||
Reference in New Issue
Block a user