Adds all tags available to SCADA to README.md and excel document
This commit is contained in:
Patrick McDonagh
231
README.md
231
README.md
@@ -196,3 +196,234 @@
|
||||
| 44 | Power: Over PF Lagging |
|
||||
| 45 | Power: Under PF Leading |
|
||||
| 46 | Power: Over PF Leading |
|
||||
|
||||
# SCADA Tags
|
||||
|
||||
| TYPE | CATEGORY | NAME | DESCRIPTION | DATATYPE |
|
||||
|-------|------------------|------------------------------------|--------------------------------------------------------------------------|----------|
|
||||
| TAG | Command | cfg_READ | Read configuration from Energy Monitor | BOOL |
|
||||
| TAG | Command | cfg_WRITE | Write configuration to Energy Monitor | BOOL |
|
||||
| TAG | Command | SCADA_ALM_RESET | Reset All Alarms | BOOL |
|
||||
| TAG | Command | SCADA_START_PUMP_BIT | Start from SCADA | BOOL |
|
||||
| TAG | Command | SCADA_STOP_PUMP_BIT | Stop from SCADA | BOOL |
|
||||
| TAG | Command | Set_Default_E300_Configuration | Set E300 to Default Configurations | BOOL |
|
||||
| TAG | Command | Set_PLC_Time | Command to set PLC time | BOOL |
|
||||
| TAG | Command | Start_Command | Start Command | BOOL |
|
||||
| TAG | Command | Stop_Command | Stop Command | BOOL |
|
||||
| ALIAS | Command | TripResetCmd | Trip Reset Command | BOOL |
|
||||
| TAG | Device Config | cfg_DHSensorDistToIntake | Feet from Sensor to Pump Intake | REAL |
|
||||
| TAG | Device Config | cfg_E300_Disabled | Energy Monitor is Disabled | BOOL |
|
||||
| TAG | Device Config | cfg_SpecificGravity | Fluid Specific Gravity | REAL |
|
||||
| TAG | Device Config | DH_Pressure_Shutdown | | REAL |
|
||||
| TAG | Device Config | DH_Pressure_Shutdown_Enabled | | BOOL |
|
||||
| TAG | Device Config | DH_Pressure_Startup | | REAL |
|
||||
| TAG | Device Config | DH_Pressure_Startup_Enabled | | BOOL |
|
||||
| TAG | Device Config | DH_Temp_Shutdown | | REAL |
|
||||
| TAG | Device Config | DH_Temp_Shutdown_Enabled | | BOOL |
|
||||
| TAG | Device Config | DH_Temp_Startup | | REAL |
|
||||
| TAG | Device Config | DH_Temp_Startup_Enabled | | BOOL |
|
||||
| TAG | Device Config | Downtime_Time_Parameter | Seconds to wait while tripped for any reason other than Overload | DINT |
|
||||
| TAG | Device Config | Downtime_Time_Parameter_OL | Seconds to wait while tripped for Overload | DINT |
|
||||
| TAG | Device Config | HI_PSI_ALM_SETPOINT | High Tubing Pressure Alarm Setpoint | REAL |
|
||||
| TAG | Device Config | Input_DateTime.Day | Datetime for setting PLC Datetime from SCADA | DINT |
|
||||
| TAG | Device Config | Input_DateTime.Hour | Datetime for setting PLC Datetime from SCADA | DINT |
|
||||
| TAG | Device Config | Input_DateTime.Microsecond | Datetime for setting PLC Datetime from SCADA | DINT |
|
||||
| TAG | Device Config | Input_DateTime.Minute | Datetime for setting PLC Datetime from SCADA | DINT |
|
||||
| TAG | Device Config | Input_DateTime.Month | Datetime for setting PLC Datetime from SCADA | DINT |
|
||||
| TAG | Device Config | Input_DateTime.Second | Datetime for setting PLC Datetime from SCADA | DINT |
|
||||
| TAG | Device Config | Input_DateTime.Year | Datetime for setting PLC Datetime from SCADA | DINT |
|
||||
| TAG | Device Config | LO_FLOW_ALM_SETPOINT | Low Flow Alarm Setpoint | REAL |
|
||||
| TAG | Device Config | LO_PSI_ALM_SETPOINT | Low Tubing Pressure Alarm Setpoint | REAL |
|
||||
| TAG | Device Status | Auto_Mode | Auto Mode | BOOL |
|
||||
| TAG | Device Status | Contactor_Status | Contactor Status | BOOL |
|
||||
| TAG | Device Status | DATETIME.Day | Current Controller Datetime | DINT |
|
||||
| TAG | Device Status | DATETIME.Hour | Current Controller Datetime | DINT |
|
||||
| TAG | Device Status | DATETIME.Microsecond | Current Controller Datetime | DINT |
|
||||
| TAG | Device Status | DATETIME.Minute | Current Controller Datetime | DINT |
|
||||
| TAG | Device Status | DATETIME.Month | Current Controller Datetime | DINT |
|
||||
| TAG | Device Status | DATETIME.Second | Current Controller Datetime | DINT |
|
||||
| TAG | Device Status | DATETIME.Year | Current Controller Datetime | DINT |
|
||||
| TAG | Device Status | Device_Status | Device Status String | STRING |
|
||||
| TAG | Device Status | Device_Status_INT | Integer for Device Status Indication | DINT |
|
||||
| TAG | Device Status | DH_DownholeStatus | Downhole Monitor Status | STRING |
|
||||
| TAG | Device Status | DH_DownholeStatus_INT | Integer for Downhole Monitor Status | INT |
|
||||
| TAG | Device Status | Downhole_Tool_Enabled | Downhole Monitor is Enabled | BOOL |
|
||||
| ALIAS | Device Status | E300_Auto_Mode_Switch | Auto Mode Switch Input 02 on E300 | BOOL |
|
||||
| ALIAS | Device Status | E300_Contactor_Input | Contactor Status Input 00 on E300 | BOOL |
|
||||
| ALIAS | Device Status | E300_Hand_Mode_Switch | Hand Mode Switch Input 03 on E300 | BOOL |
|
||||
| ALIAS | Device Status | E300_Start_Button | Start Button Input 01 on E300 | BOOL |
|
||||
| TAG | Device Status | Hand_Mode | Hand Mode | BOOL |
|
||||
| TAG | Device Status | HI_PSI_SHUTDOWN_ALM | High Tubing Pressure Alarm Active | BOOL |
|
||||
| ALIAS | Device Status | High_Pressure_Switch | High Pressure Switch, Fail-Low, (1 = OK) | BOOL |
|
||||
| TAG | Device Status | Lightning_Arrestor_Tripped | Lighning Arrestor is Tripped | BOOL |
|
||||
| TAG | Device Status | LO_FLOW_ALM | Low Flow Alarm Active | BOOL |
|
||||
| TAG | Device Status | LO_PSI_SHUTDOWN_ALM | Low Tubing Pressure Alarm Active | BOOL |
|
||||
| TAG | Device Status | Off_Mode | Off Mode | BOOL |
|
||||
| TAG | Device Status | Overall_Trip_Status | Overall Trip Status (Mapped from Overall_Trip_Status_INT) | STRING |
|
||||
| TAG | Device Status | Overall_Trip_Status_INT | Overall Trip Status Integer | DINT |
|
||||
| TAG | Device Status | Overall_Warning_Status | Overall Warning Status (Mapped from Overall_Warning_Status) | STRING |
|
||||
| TAG | Device Status | Overall_Warning_Status_INT | Overall Warning Status Integer | DINT |
|
||||
| TAG | Device Status | Time_Until_Startup | Seconds until device startup | DINT |
|
||||
| TAG | Device Status | TubingPressure | Scaled Tubing Pressure Measurment | REAL |
|
||||
| ALIAS | Device Status | UPS_Buffering | UPS is Buffering. | BOOL |
|
||||
| ALIAS | Device Status | UPS_Ready | UPS is Ready | BOOL |
|
||||
| ALIAS | Device Status | UPS_ReplaceBattery | UPS Battery needs Replacing | BOOL |
|
||||
| TAG | Downhole Monitor | DH_Fluid_Level | Fluid Level above the Pump Intake | REAL |
|
||||
| TAG | Downhole Monitor | DH_IntakePressure | Pump Intake Pressure (measured at sensor) | REAL |
|
||||
| TAG | Downhole Monitor | DH_IntakeTemperature | Pump Intake Temperature | REAL |
|
||||
| TAG | Downhole Monitor | DH_Pressure_Offset | Ambient Pressure Offset | REAL |
|
||||
| TAG | Downhole Monitor | DH_PSIRating | PSI Rating of Instrument (/1000) | DINT |
|
||||
| TAG | Energy Config | cfg_GF_GroundFaultInhibitTime | Ground Fault Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_GF_GroundFaultTripDelay | Ground Fault Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_GF_GroundFaultTripLevel | Ground Fault Trip Level | REAL |
|
||||
| TAG | Energy Config | cfg_GF_GroundFaultWarningDelay | Ground Fault Warning Delay | REAL |
|
||||
| TAG | Energy Config | cfg_GF_GroundFaultWarningLevel | Ground Fault Warning Level | REAL |
|
||||
| TAG | Energy Config | cfg_I_CTPrimary | Current Transformer Primary Ratio | INT |
|
||||
| TAG | Energy Config | cfg_I_CTSecondary | Current Transformer Secondary Ratio | INT |
|
||||
| TAG | Energy Config | cfg_I_CurrentImbalanceInhibitTime | Current Imbalance Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_I_CurrentImbalanceTripDelay | Current Imbalance Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_I_CurrentImbalanceTripLevel | Current Imbalance Trip Level | SINT |
|
||||
| TAG | Energy Config | cfg_I_CurrentImbalanceWarningLevel | Current Imbalance Warning Level | SINT |
|
||||
| TAG | Energy Config | cfg_I_FLASetting | Motor FLA | REAL |
|
||||
| TAG | Energy Config | cfg_I_JamInhibitTime | Jam Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_I_JamTripDelay | Jam Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_I_JamTripLevel | Jam Trip Level | INT |
|
||||
| TAG | Energy Config | cfg_I_JamWarningLevel | Jam Warning Level | INT |
|
||||
| TAG | Energy Config | cfg_I_LineLossInhibitTime | Line Loss Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_I_LineLossTripDelay | Line Loss Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_I_OvercurrentInhibitTime | Overcurrent Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_I_OvercurrentTripDelay | Overcurrent Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_I_OvercurrentTripLevel | Overcurrent Trip Level | SINT |
|
||||
| TAG | Energy Config | cfg_I_OvercurrentWarningLevel | Overcurrent Warning Level | SINT |
|
||||
| TAG | Energy Config | cfg_I_StallEnabledTime | Stall Enabled Time | SINT |
|
||||
| TAG | Energy Config | cfg_I_StallTripLevel | Stall Trip Level | INT |
|
||||
| TAG | Energy Config | cfg_I_UndercurrentInhibitTime | Undercurrent Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_I_UndercurrentTripDelay | Undercurrent Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_I_UndercurrentTripLevel | Undercurrent Trip Level | SINT |
|
||||
| TAG | Energy Config | cfg_I_UndercurrentWarningLevel | Undercurrent Warning Level | SINT |
|
||||
| TAG | Energy Config | cfg_I_UnderloadInhibitTime | Underload Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_I_UnderloadTripDelay | Underload Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_I_UnderloadTripLevel | Underload Trip Level | SINT |
|
||||
| TAG | Energy Config | cfg_I_UnderloadWarningLevel | Underload Warning Level | SINT |
|
||||
| TAG | Energy Config | cfg_PL_PhaseLossInhibitTime | Phase Loss Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_PL_PhaseLossTripDelay | Phase Loss Trip Delay | REAL |
|
||||
| TAG | Device Config | cfg_PressureSwitchDisabled | High Pressure Switch is Disabled | BOOL |
|
||||
| TAG | Energy Config | cfg_TCU_OLResetLevel | Thermal Capacity Utilization Overload Reset Level | SINT |
|
||||
| TAG | Energy Config | cfg_TCU_OLWarningLevel | Thermal Capacity Utilization Overload Warning Level | SINT |
|
||||
| TAG | Energy Config | cfg_TCU_TripClass | Thermal Capacity Utilization Trip Class | SINT |
|
||||
| TAG | Energy Config | cfg_V_OverfrequencyInhibitTime | Overfrequency Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_V_OverfrequencyTripDelay | Overfrequency Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_V_OverfrequencyTripLevel | Overfrequency Trip Level | SINT |
|
||||
| TAG | Energy Config | cfg_V_OverfrequencyWarningLevel | Overfrequency Warning Level | SINT |
|
||||
| TAG | Energy Config | cfg_V_OvervoltageInhibitTime | Overvoltage Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_V_OvervoltageTripDelay | Overvoltage Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_V_OvervoltageTripLevel | Overvoltage Trip Level | REAL |
|
||||
| TAG | Energy Config | cfg_V_OvervoltageWarningLevel | Overvoltage Warning Level | REAL |
|
||||
| TAG | Energy Config | cfg_V_PhaseRotationInhibitTime | Phase Rotation Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_V_PhaseRotationTripType | Phase Rotation Trip Type (0 = ABC, 1 = ACB) | SINT |
|
||||
| TAG | Energy Config | cfg_V_PTPrimary | Potential Transformer Primary Ratio | INT |
|
||||
| TAG | Energy Config | cfg_V_PTSecondary | Potential Transformer Secondary Ratio | INT |
|
||||
| TAG | Energy Config | cfg_V_UnderfrequencyInhibitTime | Underfrequency Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_V_UnderfrequencyTripDelay | Underfrequency Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_V_UnderfrequencyTripLevel | Underfrequency Trip Level | SINT |
|
||||
| TAG | Energy Config | cfg_V_UnderfrequencyWarningLevel | Underfrequency Warning Level | SINT |
|
||||
| TAG | Energy Config | cfg_V_UndervoltageInhibitTime | Undervoltage Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_V_UndervoltageTripDelay | Undervoltage Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_V_UndervoltageTripLevel | Undervoltage Trip Level | REAL |
|
||||
| TAG | Energy Config | cfg_V_UndervoltageWarningLevel | Undervoltage Warning Level | REAL |
|
||||
| TAG | Energy Config | cfg_V_VoltageImbalanceInhibitTime | Voltage Imbalance Inhibit Time | SINT |
|
||||
| TAG | Energy Config | cfg_V_VoltageImbalanceTripDelay | Voltage Imbalance Trip Delay | REAL |
|
||||
| TAG | Energy Config | cfg_V_VoltageImbalanceTripLevel | Voltage Imbalance Trip Level | SINT |
|
||||
| TAG | Energy Config | cfg_V_VoltageImbalanceWarningLevel | Voltage Imalance Warning Level | SINT |
|
||||
| TAG | Energy Config | cfg_V_VoltageMode | Voltage Mode ( ) | SINT |
|
||||
| TAG | Energy Config | TripEnable_I_CurrentImbalance | Current Imbalance Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_I_GroundFault | Ground Fault Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_I_Jam | Jam Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_I_LineLoss | Line Loss Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_I_Overcurrent | Overcurrent Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_I_Overload | Overload Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_I_PhaseLoss | Phase Loss Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_I_Stall | Stall Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_I_Undercurrent | Undercurrent Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_I_Underload | Underload Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_V_Overfrequency | Overfrequency Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_V_Overvoltage | Overvoltage Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_V_PhaseRotation | Phase Rotation Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_V_Underfrequency | Underfrequency Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_V_Undervoltage | Undervoltage Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | TripEnable_V_VoltageUnbalance | Voltage Imbalance Trip Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_I_CurrentImbalance | Current Imbalance Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_I_GroundFault | Ground Fault Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_I_Jam | Jam Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_I_LineLoss | Line Loss Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_I_Overcurrent | Overcurrent Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_I_Overload | Overload Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_I_Undercurrent | Undercurrent Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_I_Underload | Underload Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_V_Overfrequency | Overfrequency Wanring Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_V_Overvoltage | Overvoltage Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_V_PhaseRotation | Phase Rotation Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_V_Underfrequency | Underfrequency Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_V_Undervoltage | Undervoltage Warning Enabled | BOOL |
|
||||
| TAG | Energy Config | WarningEnable_V_VoltageUnbalance | Voltage Imbalance Warning Enabled | BOOL |
|
||||
| TAG | Energy Status | E300_AverageCurrent | Average Current | REAL |
|
||||
| TAG | Energy Status | E300_AverageLLVoltage | Average Line-to-Line Voltage | REAL |
|
||||
| TAG | Energy Status | E300_ControlTripBit | Control Trip Status Integer (-1 = No Trip) | DINT |
|
||||
| TAG | Energy Status | E300_ControlTripStatus | Control Trip Status | STRING |
|
||||
| TAG | Energy Status | E300_ControlWarningBit | Control Warning Status Integer (-1 = No Warning) | DINT |
|
||||
| TAG | Energy Status | E300_ControlWarningStatus | Control Warning Status | STRING |
|
||||
| TAG | Energy Status | E300_CurrentTripBit | Current Trip Status Integers (-1 = No Trip) | DINT |
|
||||
| TAG | Energy Status | E300_CurrentTripStatus | Current Trip Status | STRING |
|
||||
| TAG | Energy Status | E300_CurrentWarningBit | Current Warning Status Integer (-1= No Warning) | DINT |
|
||||
| TAG | Energy Status | E300_CurrentWarningStatus | Current Warning Status | STRING |
|
||||
| TAG | Energy Status | E300_L1Current | L1 Current | REAL |
|
||||
| TAG | Energy Status | E300_L1L2Voltage | L1-L2 Voltage | REAL |
|
||||
| TAG | Energy Status | E300_L2Current | L2 Current | REAL |
|
||||
| TAG | Energy Status | E300_L2L3Voltage | L2-L3 Voltage | REAL |
|
||||
| TAG | Energy Status | E300_L3Current | L3 Current | REAL |
|
||||
| TAG | Energy Status | E300_L3L1Voltage | L3-L1 Voltage | REAL |
|
||||
| TAG | Energy Status | E300_LineFrequency | Line Frequency | REAL |
|
||||
| TAG | Energy Status | E300_PercentCurrentUnbalance | Percent Current Imbalance | REAL |
|
||||
| TAG | Energy Status | E300_PercentVoltageUnbalance | Percent Voltage Imbalance | REAL |
|
||||
| TAG | Energy Status | E300_PhaseRotation | Phase Rotation (String) | STRING |
|
||||
| TAG | Energy Status | E300_PhaseRotation_INT | Phase Rotation Integer | DINT |
|
||||
| TAG | Energy Status | E300_PowerTripBit | Power Trip Status Integer (-1 = No Trip) | DINT |
|
||||
| TAG | Energy Status | E300_PowerTripStatus | Power Trip Status | STRING |
|
||||
| TAG | Energy Status | E300_PowerWarningBit | Power Warning Status Integer (-1 = No Warning) | DINT |
|
||||
| TAG | Energy Status | E300_PowerWarningStatus | Power Warning Status | STRING |
|
||||
| TAG | Energy Status | E300_ThreePhaseTruePowerFactor | True 3-Phase Power Factor | REAL |
|
||||
| TAG | Energy Status | E300_TotalApparentPower | Total Apparent Power (kVA) | REAL |
|
||||
| TAG | Energy Status | E300_TotalReactivePower | Total Reactive Power (kVAR) | REAL |
|
||||
| TAG | Energy Status | E300_TotalRealPower | Total Real Power (kW) | REAL |
|
||||
| TAG | Energy Status | E300_VoltageTripBit | Voltage Trip Status Integer (-1 = No Trip) | DINT |
|
||||
| TAG | Energy Status | E300_VoltageTripStatus | Voltage Trip Status | STRING |
|
||||
| TAG | Energy Status | E300_VoltageWarningBit | Voltage Warning Status Integer (-1 = No Warning) | DINT |
|
||||
| TAG | Energy Status | E300_VoltageWarningStatus | Voltage Warning Status | STRING |
|
||||
| ALIAS | Energy Status | TripStatus | Trip Present | BOOL |
|
||||
| TAG | Energy Status | VoltageOK | Voltage is within the tolerable Limits | BOOL |
|
||||
| TAG | Flow | FlowRate | Scaled Flow Rate | REAL |
|
||||
| TAG | Flow | LASTMONTH_TOTAL_BBL | Last Month Total BBL | REAL |
|
||||
| TAG | Flow | LASTMONTH_TOTAL_RUN_TIME_HOURS | Last Month Total Runtime Hours | REAL |
|
||||
| TAG | Flow | THISMONTH_TOTAL_BBL | This Month Total BBL | REAL |
|
||||
| TAG | Flow | THISMONTH_TOTAL_RUN_TIME_HOURS | This Month Total Runtime Hours | REAL |
|
||||
| TAG | Flow | TODAY_TOTAL_BBL | Today's Total BBL | REAL |
|
||||
| TAG | Flow | TODAY_TOTAL_RUN_TIME_HOURS | Today's Total Runtime Hours | REAL |
|
||||
| TAG | Flow | YESTERDAY_TOTAL_BBL | Yesterday's Total BBL | REAL |
|
||||
| TAG | Flow | YESTERDAY_TOTAL_RUN_TIME_HOURS | Testerday's Total Runtime Hours | REAL |
|
||||
| TAG | Permissive | RP_Flow | Run not prevented by Flow | BOOL |
|
||||
| TAG | Permissive | RP_Mode | Run not prevented by Mode | BOOL |
|
||||
| TAG | Permissive | RP_Pressure | Run not prevented by Downhole Pressure | BOOL |
|
||||
| TAG | Permissive | RP_Remote | Run not prevented by Remote Trip | BOOL |
|
||||
| TAG | Permissive | RP_Temperature | Run not prevented by Downhole Temperature | BOOL |
|
||||
| TAG | Permissive | RP_Trip | Run not prevented by Energy Trip | BOOL |
|
||||
| TAG | Permissive | RP_TubingPressure | Run not prevented by Tubing Pressure | BOOL |
|
||||
| TAG | Permissive | Run_Permissive | Run not prevented | BOOL |
|
||||
| TAG | Permissive | SP_Mode | Startup not prevented by Mode | BOOL |
|
||||
| TAG | Permissive | SP_Pressure | Startup not prevented by Downhole Pressure | BOOL |
|
||||
| TAG | Permissive | SP_Remote | Startup not prevented by Remote Trip | BOOL |
|
||||
| TAG | Permissive | SP_Temperature | Startup not prevented by Downhole Temperature | BOOL |
|
||||
| TAG | Permissive | SP_Trip | Startup not prevented by Energy Trip | BOOL |
|
||||
| TAG | Permissive | SP_Voltage | Startup not prevented by Voltage | BOOL |
|
||||
| TAG | Permissive | Start_Permissive | Startup not prevented | BOOL |
|
||||
| TAG | Watchdog | datalogger_watchdog | DataLogger Handshake: Datalogger will write 1 to this tag when it sees 0 | BOOL |
|
||||
| TAG | Watchdog | Datalogger_Watchdog_Timeout | The datalogger is not communicating with the PLC | BOOL |
|
||||
|
||||
BIN
SCADA Tags.xlsx
Normal file
BIN
SCADA Tags.xlsx
Normal file
Binary file not shown.
Reference in New Issue
Block a user