diff --git a/docs/index.md b/docs/index.md
index 790bd07..7ff41ad 100644
--- a/docs/index.md
+++ b/docs/index.md
@@ -26,7 +26,7 @@
 1.   [Set IP Address via RSLinx](tasks/new-hire-task1.html)
 2.   [Enable VNC Server on Panelview 800 HMI](tasks/new-hire-task2.html)
 3.   [Set HMI IP Address on a Panelview Plus 6/7 HMI](tasks/new-hire-task3.html)
-4.   Enable VNC Server on Panelview Plus 6/7 HMI
+4.   [Enable VNC Server on Panelview Plus 6/7 HMI](tasks/new-hire-task4.html)
 5.   Flash the firmware for a device via CompactFlash and RSLinx
 6.   Download a Connected Components Workbench drive file to a VFD
 7.   Download a PLC program to a CompactLogix PLC
diff --git a/docs/tasks/new-hire-task3.md b/docs/tasks/new-hire-task3.md
index 4425ab7..a58415c 100644
--- a/docs/tasks/new-hire-task3.md
+++ b/docs/tasks/new-hire-task3.md
@@ -1,18 +1,14 @@
-# Task 3 - Set IP Address on Panelview Plus 6/7
+# Task 3 - Set IP Adress on Panelview Plus 6/7
 
 ## Equipment Needed
 
 -   Panelview Plus 6/7
--   EtherNet Cable
 
 ## Procedure
 
 1.  If an application is running, exit the application.
-2.  From the Main Menu, press "Exit".
-3.  Enter the HMI Password and press "Enter". This should bring you to the Windows CE Desktop.
-4.  Navigate to "Start > Settings > Control Panel" and open "Server Config".
-5.  Configure the Security options on the VNC Server tab and hit "OK"
-6.  Open "Services" from the Control Panel menu.
-7.  Press the "VNC Server" button to ensure it is green (enabled).
-8.  Verify the VNC server is configured correctly using VNC Viewer.
-9.  Reboot the HMI by navigating to "Start > Programs > Restart System".
+2.  Navigate to "Terminal Settings > Networks and Communications > Network Connections > Network Adapters".
+3.  Select "IP Address".
+4.  Set the IP Address, Subnet Mask, and Gateway to the desired settings.
+5.  Ensure "Use DHCP" is set to "No."
+6.  Return to the Main Menu and press "Reset" to restart the HMI.
diff --git a/docs/tasks/new-hire-task4.md b/docs/tasks/new-hire-task4.md
new file mode 100644
index 0000000..7cb6228
--- /dev/null
+++ b/docs/tasks/new-hire-task4.md
@@ -0,0 +1,18 @@
+# Task 4 - Enable VNC Server on Panelview Plus 6/7
+
+## Equipment Needed
+
+-   Panelview Plus 6/7
+-   EtherNet Cable
+
+## Procedure
+
+1.  If an application is running, exit the application.
+2.  From the Main Menu, press "Exit".
+3.  Enter the HMI Password and press "Enter". This should bring you to the Windows CE Desktop.
+4.  Navigate to "Start > Settings > Control Panel" and open "Server Config".
+5.  Configure the Security options on the VNC Server tab and hit "OK"
+6.  Open "Services" from the Control Panel menu.
+7.  Press the "VNC Server" button to ensure it is green (enabled).
+8.  Verify the VNC server is configured correctly using VNC Viewer.
+9.  Reboot the HMI by navigating to "Start > Programs > Restart System".