Files
MaxWaterSystem/PLC/ModbusCardConfig/HP_DOWNHOLE_SENSOR_STD/config11.lst
2018-05-22 11:58:57 -05:00

53 lines
2.8 KiB
Plaintext

+---------------------------------------------------------------+
| Configuration listing for channel 1 |
+---------------------------------------------------------------+
| COMPANY = Woodhead Software & Electronics
| DATE = Tuesday, March 14, 2017 At 10:01
| VERSION = v1.0.0
| CONFIGURATION NAME = HP_DOWNHOLE_SENSOR_STD
| BOARD LOCATION = The configuration type has been modified. You must restart all the applications communicating with the %s cards.
+---------------------------------------------------------------+
-----------------------------------------------------------------
Master Information
-----------------------------------------------------------------
>> Serial Port Configuration :
Network format = RS485/RS422
Baud Rate = 38400 bits/s
Parity Control = NONE
Stop bit(s) = 1 Bit
>> Protocol Configuration :
Inter-frames Silence = 0 ms
Mode = RTU
Request Time-out = 10 s
Max. Request = 1
-----------------------------------------------------------------
Equipment 0
-----------------------------------------------------------------
Broadcast Reserved Address
-----------------------------------------------------------------
Equipment 1
-----------------------------------------------------------------
Modbus Generic
>> applicom information :
Topic Name = DHSENSOR
Comment =
>> Network Configuration :
Time-out = 1000 ms
Nb of Repetitions on CRC, Time-out = 2
Nb of Repetitions on Error 4 = 0
Slave number = 234
>> Messaging Configuration :
Maximum Number of simultaneus Reque= 1
Maximum Bits Reading = 2040
Maximum Bits Writing = 2040
Maximum Words Reading = 127
Maximum Words Writing = 127
Double/floating word format = Little Endian (Intel)
Single Word Writing Support = Yes
Single Bit Writing Support = Yes