# Max Water System Panel Installation

Please follow the following steps for the software uploads into the different components.

## Power-Up

Start by suppling power to the drive and hooking up to the switch.

![Network Switch](imgs/Picture1.png "Network Switch") ![Power Wiring](imgs/Picture2.png "Power Wiring")


## VFD Programming

1.  Start by changing the IP Address to 192.168.1.12. This done on the front of the drive. Must remove cover and set the dials 0 1 2. This is the last three digits for the IP address. Look at pic: Start from the top dial down, the top dial been 0 and so forth.
    ![Side View](imgs/Picture3.png "Side View") ![Switch View](imgs/Picture4.png "Switch View")

2.  Go to This PC > Document > Git Hub > Max water Systems > Advance-vfd-ipp-ccw and double click on file. Wait until Connect Component software loads up.

    ![Windows explorer showing file](imgs/Picture5.png "Windows Explorer showing path")

    ![Connected Components Workbench with project open](imgs/Picture6.png "Connected Components Workbench with project open")