diff --git a/docs/imgs/Picture1.png b/docs/imgs/Picture1.png
new file mode 100644
index 0000000..7ec9100
Binary files /dev/null and b/docs/imgs/Picture1.png differ
diff --git a/docs/imgs/Picture2.png b/docs/imgs/Picture2.png
new file mode 100644
index 0000000..438ace1
Binary files /dev/null and b/docs/imgs/Picture2.png differ
diff --git a/docs/imgs/Picture3.png b/docs/imgs/Picture3.png
new file mode 100644
index 0000000..b6ae4dd
Binary files /dev/null and b/docs/imgs/Picture3.png differ
diff --git a/docs/imgs/Picture4.png b/docs/imgs/Picture4.png
new file mode 100644
index 0000000..4a606b4
Binary files /dev/null and b/docs/imgs/Picture4.png differ
diff --git a/docs/imgs/Picture5.png b/docs/imgs/Picture5.png
new file mode 100644
index 0000000..f49b0dc
Binary files /dev/null and b/docs/imgs/Picture5.png differ
diff --git a/docs/imgs/Picture6.png b/docs/imgs/Picture6.png
new file mode 100644
index 0000000..77daff0
Binary files /dev/null and b/docs/imgs/Picture6.png differ
diff --git a/docs/installation.md b/docs/installation.md
new file mode 100644
index 0000000..34c53ae
--- /dev/null
+++ b/docs/installation.md
@@ -0,0 +1,21 @@
+# Max Water System Panel Installation
+
+Please follow the following steps for the software uploads into the different components.
+
+## Power-Up
+
+Start by suppling power to the drive and hooking up to the switch.
+
+![Network Switch](imgs/Picture1.png "Network Switch") ![Power Wiring](imgs/Picture2.png "Power Wiring")
+
+
+## VFD Programming
+
+1.  Start by changing the IP Address to 192.168.1.12. This done on the front of the drive. Must remove cover and set the dials 0 1 2. This is the last three digits for the IP address. Look at pic: Start from the top dial down, the top dial been 0 and so forth.
+    ![Side View](imgs/Picture3.png "Side View") ![Switch View](imgs/Picture4.png "Switch View")
+
+2.  Go to This PC > Document > Git Hub > Max water Systems > Advance-vfd-ipp-ccw and double click on file. Wait until Connect Component software loads up.
+
+    ![Windows explorer showing file](imgs/Picture5.png "Windows Explorer showing path")
+
+    ![Connected Components Workbench with project open](imgs/Picture6.png "Connected Components Workbench with project open")