added all current configs

Pub_Sub/abbflow/v1/device_supervisor_abbflowv1.cfg

@@ -284,6 +284,10 @@
   {
    "key": "MAC_UPPER",
    "value": "00:18:05:1A:E5:57"
+  },
+  {
+      "key": "MAC_LOWER",
+      "value": "00:18:05:1a:e5:57"
   }
  ],
  "quickfaas": {
@@ -292,7 +296,7 @@
    {
     "name": "Mistaway",
     "trigger": "measure_event",
-    "topic": "meshify/db/194/_/abbflow/",
+    "topic": "meshify/db/194/_/abbflow/${MAC_LOWER}",
     "qos": 1,
     "groups": [
      "default"

Pub_Sub/abbflow/v2/device_supervisor_abbflowv2.cfg

@@ -284,6 +284,10 @@
         {
             "key": "MAC_UPPER",
             "value": "00:18:05:1A:E5:57"
+        },
+        {
+            "key": "MAC_LOWER",
+            "value": "00:18:05:1a:e5:57"
         }
     ],
     "quickfaas": {
@@ -292,13 +296,13 @@
             {
                 "name": "Mistaway",
                 "trigger": "measure_event",
-                "topic": "meshify/db/194/_/abbflow/",
+                "topic": "meshify/db/194/_/abbflow/${MAC_LOWER}",
                 "qos": 1,
                 "groups": [
                     "default"
                 ],
                 "funcName": "sendData",
-                "script": "# Enter your python code.\nimport json\nfrom common.Logger import logger\nfrom quickfaas.remotebus import publish\nimport re, uuid\nfrom paho.mqtt import client\n\nlwtData = {\n    \"init\":False,\n    \"client\": client.Client(client_id=str(uuid.uuid4()), clean_session=True, userdata=None, protocol=client.MQTTv311, transport=\"tcp\")\n}\ndef lwt(mac):\n    try:\n        #if not lwtData[\"connected\"]:\n        if not lwtData[\"init\"]:\n            logger.info(\"INITIALIZING LWT CLIENT\")\n            lwtData[\"client\"].username_pw_set(username=\"admin\", password=\"columbus\")\n            lwtData[\"client\"].will_set(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\",json.dumps({\"value\":False}))\n            lwtData[\"init\"] = True\n            logger.info(\"Connecting to MQTT Broker for LWT purposes!!!!!!!\")\n            lwtData[\"client\"].connect(\"mq194.imistaway.net\",1883, 600)\n        #publish(\"meshify/db/194/_/mainHP/00:18:05:1a:e5:37:00:00/connected\", json.dumps({\"value\":True}), __qos__)\n        lwtData[\"client\"].publish(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\", json.dumps({\"value\":True}))\n    except Exception as e:\n        logger.error(\"LWT DID NOT DO THE THING\")\n        logger.error(e)\n\ndef sendData(message):\n    logger.debug(message)\n    mac = ':'.join(re.findall('..', '%012x' % uuid.getnode()))\n    lwt(mac)\n    for measure in message[\"measures\"]:\n        publish(__topic__ + mac + \":01:99/\" + measure[\"name\"], json.dumps([{\"value\": measure[\"value\"]}]), __qos__)\n        #publish(__topic__, json.dumps({measure[\"name\"]: measure[\"value\"]}), __qos__)\n    ",
+                "script": "# Enter your python code.\nimport json\nfrom common.Logger import logger\nfrom quickfaas.remotebus import publish\nimport re, uuid\nfrom paho.mqtt import client\n\nlwtData = {\n    \"init\":False,\n    \"client\": client.Client(client_id=str(uuid.uuid4()), clean_session=True, userdata=None, protocol=client.MQTTv311, transport=\"tcp\")\n}\ndef lwt(mac):\n    try:\n        #if not lwtData[\"connected\"]:\n        if not lwtData[\"init\"]:\n            logger.info(\"INITIALIZING LWT CLIENT\")\n            lwtData[\"client\"].username_pw_set(username=\"admin\", password=\"columbus\")\n            lwtData[\"client\"].will_set(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\",json.dumps({\"value\":False}))\n            lwtData[\"init\"] = True\n            logger.info(\"Connecting to MQTT Broker for LWT purposes!!!!!!!\")\n            lwtData[\"client\"].connect(\"mq194.imistaway.net\",1883, 600)\n        #publish(\"meshify/db/194/_/mainHP/00:18:05:1a:e5:37:00:00/connected\", json.dumps({\"value\":True}), __qos__)\n        lwtData[\"client\"].publish(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\", json.dumps({\"value\":True}))\n    except Exception as e:\n        logger.error(\"LWT DID NOT DO THE THING\")\n        logger.error(e)\n\ndef sendData(message):\n    logger.debug(message)\n    mac = __topic__.split(\"/\")[-1] #':'.join(re.findall('..', '%012x' % uuid.getnode()))\n    lwt(mac)\n    for measure in message[\"measures\"]:\n        publish(__topic__ + \":01:99/\" + measure[\"name\"], json.dumps([{\"value\": measure[\"value\"]}]), __qos__)\n        #publish(__topic__, json.dumps({measure[\"name\"]: measure[\"value\"]}), __qos__)\n    ",
                 "msgType": 0,
                 "cloudName": "default"
             }

Pub_Sub/abbflow/v2/pub/sendData.py

@@ -27,9 +27,9 @@ def lwt(mac):
 
 def sendData(message):
     logger.debug(message)
-    mac = ':'.join(re.findall('..', '%012x' % uuid.getnode()))
+    mac = __topic__.split("/")[-1] #':'.join(re.findall('..', '%012x' % uuid.getnode()))
     lwt(mac)
     for measure in message["measures"]:
-        publish(__topic__ + mac + ":01:99/" + measure["name"], json.dumps([{"value": measure["value"]}]), __qos__)
+        publish(__topic__ + ":01:99/" + measure["name"], json.dumps([{"value": measure["value"]}]), __qos__)
         #publish(__topic__, json.dumps({measure["name"]: measure["value"]}), __qos__)
     

Pub_Sub/advvfdipp/guidon/v1/pub/sendData.py

@@ -0,0 +1,191 @@
+# Enter your python code.
+import json
+from common.Logger import logger
+from quickfaas.remotebus import publish
+import re, uuid
+
+
+def sendData(message):
+    #logger.debug(message)
+    mac = ':'.join(re.findall('..', '%012x' % uuid.getnode()))
+    for measure in message["measures"]:
+        try:
+            logger.debug(measure)
+            if measure["name"] in ["wellstatus","pidcontrolmode","downholesensorstatus","alarmflowrate","alarmintakepressure","alarmintaketemperature","alarmtubingpressure","alarmvfd","alarmlockout","alarmfluidlevel","runpermissive","startpermissive","last_vfd_fault_code","vfd_fault"]:
+                logger.debug("Converting DINT/BOOL to STRING")
+                value = convert_int(measure["name"], measure["value"])
+                logger.debug("Converted {} to {}".format(measure["value"], value))
+                publish(__topic__ + mac + ":01:99/" + measure["name"], json.dumps({"value": value}), __qos__)
+            else:
+                publish(__topic__ + mac + ":01:99/" + measure["name"], json.dumps({"value": measure["value"]}), __qos__)
+        except Exception as e:
+            logger.error(e)
+        
+        #publish(__topic__, json.dumps({measure["name"]: measure["value"]}), __qos__)
+
+def convert_int(plc_tag, value):
+    well_status_codes = {
+        0: "Running",
+        1: "Pumped Off",
+        2: "Alarmed",
+        3: "Locked Out",
+        4: "Stopped"
+    }
+
+    pid_control_codes = {
+        0: "Flow",
+        1: "Fluid Level",
+        2: "Tubing Pressure",
+        3: "Manual"
+    }
+
+    downhole_codes = {
+        0: "OK",
+        1: "Connecting",
+        2: "Open Circuit",
+        3: "Shorted",
+        4: "Cannot Decode"
+    }
+
+    permissive_codes = {
+        0: "OK",
+        1: "Flow",
+        2: "Intake Pressure",
+        3: "Intake Temperature",
+        4: "Tubing Pressure",
+        5: "VFD",
+        6: "Fluid Level",
+        7: "Min. Downtime"
+    }
+
+    alarm_codes = {
+        0: "OK",
+        1: "Alarm"
+    }
+
+    alarm_vfd_codes = {
+        0: "OK",
+        1: "Locked Out"
+    }
+
+    vfd_fault_codes = {
+        0: "No Fault",
+        2: "Auxiliary Input",
+        3: "Power Loss",
+        4: "UnderVoltage",
+        5: "OverVoltage",
+        7: "Motor Overload",
+        8: "Heatsink OverTemp",
+        9: "Thermister OverTemp",
+        10: "Dynamic Brake OverTemp",
+        12: "Hardware OverCurrent",
+        13: "Ground Fault",
+        14: "Ground Warning",
+        15: "Load Loss",
+        17: "Input Phase Loss",
+        18: "Motor PTC Trip",
+        19: "Task Overrun",
+        20: "Torque Prove Speed Band",
+        21: "Output Phase Loss",
+        24: "Decel Inhibit",
+        25: "OverSpeed Limit",
+        26: "Brake Slipped",
+        27: "Torque Prove Conflict",
+        28: "TP Encls Confict",
+        29: "Analog In Loss",
+        33: "Auto Restarts Exhausted",
+        35: "IPM OverCurrent",
+        36: "SW OverCurrent",
+        38: "Phase U to Ground",
+        39: "Phase V to Ground",
+        40: "Phase W to Ground",
+        41: "Phase UV Short",
+        42: "Phase VW Short",
+        43: "Phase WU Short",
+        44: "Phase UNeg to Ground",
+        45: "Phase VNeg to Ground",
+        46: "Phase WNeg to Ground",
+        48: "System Defaulted",
+        49: "Drive Powerup",
+        51: "Clear Fault Queue",
+        55: "Control Board Overtemp",
+        59: "Invalid Code",
+        61: "Shear Pin 1",
+        62: "Shear Pin 2",
+        64: "Drive Overload",
+        66: "OW Torque Level",
+        67: "Pump Off",
+        71: "Port 1 Adapter",
+        72: "Port 2 Adapter",
+        73: "Port 3 Adapter",
+        74: "Port 4 Adapter",
+        75: "Port 5 Adapter",
+        76: "Port 6 Adapter",
+        77: "IR Volts Range",
+        78: "FluxAmps Ref Range",
+        79: "Excessive Load",
+        80: "AutoTune Aborted",
+        81: "Port 1 DPI Loss",
+        82: "Port 2 DPI Loss",
+        83: "Port 3 DPI Loss",
+        84: "Port 4 DPI Loss",
+        85: "Port 5 DPI Loss",
+        86: "Port 6 DPI Loss",
+        87: "IXo Voltage Range",
+        91: "Primary Velocity Feedback Loss",
+        93: "Hardware Enable Check",
+        94: "Alternate Velocity Feedback Loss",
+        95: "Auxiliary Velocity Feedback Loss",
+        96: "Position Feedback Loss",
+        97: "Auto Tach Switch",
+        100: "Parameter Checksum",
+        101: "Power Down NVS Blank",
+        102: "NVS Not Blank",
+        103: "Power Down NVS Incompatible",
+        104: "Power Board Checksum",
+        106: "Incompat MCB-PB",
+        107: "Replaced MCB-PB",
+        108: "Analog Calibration Checksum",
+        110: "Invalid Power Board Data",
+        111: "Power Board Invalid ID",
+        112: "Power Board App Min Version",
+        113: "Tracking DataError",
+        115: "Power Down Table Full",
+        116: "Power Down Entry Too Large",
+        117: "Power Down Data Checksum",
+        118: "Power Board Power Down Checksum",
+        124: "App ID Changed",
+        125: "Using Backup App",
+        134: "Start on Power Up",
+        137: "External Precharge Error",
+        138: "Precharge Open",
+        141: "Autotune Enc Angle",
+        142: "Autotune Speed Restricted",
+        143: "Autotune Current Regulator",
+        144: "Autotune Inertia",
+        145: "Autotune Travel",
+        13035: "Net IO Timeout",
+        13037: "Net IO Timeout"
+
+    }
+
+    plc_tags = {
+        "wellstatus": well_status_codes.get(value, "Invalid Code"),
+        "pidcontrolmode": pid_control_codes.get(value, "Invalid Code"),
+        "downholesensorstatus": downhole_codes.get(value, "Invalid Code"),
+        "alarmflowrate": alarm_codes.get(value, "Invalid Code"),
+        "alarmintakepressure": alarm_codes.get(value, "Invalid Code"),
+        "alarmintaketemperature": alarm_codes.get(value, "Invalid Code"),
+        "alarmtubingpressure": alarm_codes.get(value, "Invalid Code"),
+        "alarmvfd": alarm_codes.get(value, "Invalid Code"),
+        "alarmlockout": alarm_vfd_codes.get(value, "Invalid Code"),
+        "alarmfluidlevel": alarm_codes.get(value, "Invalid Code"),
+        "runpermissive": permissive_codes.get(value, "Invalid Code"),
+        "startpermissive": permissive_codes.get(value, "Invalid Code"),
+        "last_vfd_fault_code": vfd_fault_codes.get(value, "Invalid Code"),
+        "vfd_fault": vfd_fault_codes.get(value, "Invalid Code")
+    }
+
+    return plc_tags.get(plc_tag, "Invalid Tag")
+
+    

Pub_Sub/advvfdipp/guidon/v1/sub/receiveCommand.py

@@ -0,0 +1,50 @@
+# Enter your python code.
+import json
+from quickfaas.measure  import recall
+from common.Logger import logger
+
+def sync(mac,value, wizard_api):
+    #get new values and send
+    try:
+        data = recall()#json.loads(recall().decode("utf-8"))
+    except Exception as e:
+        logger.error(e)
+    logger.info(data)
+    for controller in data:
+        for measure in controller["measures"]:
+            #publish measure
+            topic = "meshify/db/194/_/abbflow/" + mac + "/" + measure["name"]
+            payload = [{"value": measure["value"]}]
+            logger.debug("Sending on topic: {}".format(topic))
+            logger.debug("Sending value: {}".format(payload))
+            wizard_api.mqtt_publish(topic, json.dumps(payload))
+def writeplctag(mac, value, wizard_api):
+    try:
+        value = json.loads(value.replace("'",'"'))
+        logger.debug(value)
+        message = {"advvfdipp":{value["tag"]: value["val"]}}
+        wizard_api.write_plc_values(message)
+    except Exception as e:
+        logger.debug(e)
+    
+def receiveCommand(topic, payload, wizard_api):
+    logger.debug(topic)
+    logger.debug(json.loads(payload))
+    p = json.loads(payload)[0]
+    command = p["payload"]["name"].split(".")[1]
+    commands = {
+        "sync": sync,
+        "writeplctag": writeplctag,
+    }
+    commands[command](p["mac"].lower(),p["payload"]["value"], wizard_api)
+    #logger.debug(command)
+    ack(p["msgId"], p["mac"], p["payload"]["name"].split(".")[1], p["payload"]["value"], wizard_api)
+
+def ack(msgid, mac, name, value, wizard_api):
+    #logger.debug(mac)
+    mac = "".join(mac.split(":")[:-2])
+    #logger.debug(msgid)
+    #logger.debug(mac)
+    #logger.debug(name)
+    #logger.debug(value)
+    wizard_api.mqtt_publish("meshify/responses/" + str(msgid), json.dumps([{"value": "{} Success Setting: {} To: {}".format(mac,name, value), "msgid": str(msgid)}]))

Pub_Sub/advvfdipp/guidon/v2/pub/sendData.py

@@ -0,0 +1,248 @@
+# Enter your python code.
+import json
+from common.Logger import logger
+from quickfaas.remotebus import publish
+import re, uuid
+from paho.mqtt import client
+
+lwtData = {
+    "init":False,
+    "client": client.Client(client_id=str(uuid.uuid4()), clean_session=True, userdata=None, protocol=client.MQTTv311, transport="tcp")
+}
+def lwt(mac):
+    try:
+        #if not lwtData["connected"]:
+        if not lwtData["init"]:
+            logger.info("INITIALIZING LWT CLIENT")
+            lwtData["client"].username_pw_set(username="admin", password="columbus")
+            lwtData["client"].will_set("meshify/db/194/_/mainHP/" + mac + ":00:00/connected",json.dumps({"value":False}))
+            lwtData["init"] = True
+            logger.info("Connecting to MQTT Broker for LWT purposes!!!!!!!")
+            lwtData["client"].connect("mq194.imistaway.net",1883, 600)
+        lwtData["client"].publish("meshify/db/194/_/mainHP/" + mac + ":00:00/connected", json.dumps({"value":True}))
+    except Exception as e:
+        logger.error("LWT DID NOT DO THE THING")
+        logger.error(e)
+
+def sendData(message):
+    #logger.debug(message)
+    mac = __topic__.split("/")[-1] #':'.join(re.findall('..', '%012x' % uuid.getnode()))
+    lwt(mac)
+    for measure in message["measures"]:
+        try:
+            logger.debug(measure)
+            if measure["name"] in ["wellstatus","pidcontrolmode","downholesensorstatus","alarmflowrate","alarmintakepressure","alarmintaketemperature","alarmtubingpressure","alarmvfd","alarmlockout","alarmfluidlevel","runpermissive","startpermissive","last_vfd_fault_code","vfd_fault", "external_commands", "remote_comm", "aux_pump_hand","aux_pump_auto","aux_pump_run", "aux_pump_fault"]:
+                logger.debug("Converting DINT/BOOL to STRING")
+                value = convert_int(measure["name"], measure["value"])
+                logger.debug("Converted {} to {}".format(measure["value"], value))
+                publish(__topic__ + ":01:99/" + measure["name"], json.dumps({"value": value}), __qos__)
+            else:
+                publish(__topic__ + ":01:99/" + measure["name"], json.dumps({"value": measure["value"]}), __qos__)
+        except Exception as e:
+            logger.error(e)
+        
+        #publish(__topic__, json.dumps({measure["name"]: measure["value"]}), __qos__)
+
+def convert_int(plc_tag, value):
+    well_status_codes = {
+        0: "Running",
+        1: "Pumped Off",
+        2: "Alarmed",
+        3: "Locked Out",
+        4: "Stopped"
+    }
+
+    pid_control_codes = {
+        0: "Flow",
+        1: "Fluid Level",
+        2: "Tubing Pressure",
+        3: "Manual"
+    }
+
+    downhole_codes = {
+        0: "OK",
+        1: "Connecting",
+        2: "Open Circuit",
+        3: "Shorted",
+        4: "Cannot Decode"
+    }
+
+    permissive_codes = {
+        0: "OK",
+        1: "Flow",
+        2: "Intake Pressure",
+        3: "Intake Temperature",
+        4: "Tubing Pressure",
+        5: "VFD",
+        6: "Fluid Level",
+        7: "Min. Downtime"
+    }
+
+    alarm_codes = {
+        0: "OK",
+        1: "Alarm"
+    }
+
+    alarm_vfd_codes = {
+        0: "OK",
+        1: "Locked Out"
+    }
+
+    vfd_fault_codes = {
+        0: "No Fault",
+        2: "Auxiliary Input",
+        3: "Power Loss",
+        4: "UnderVoltage",
+        5: "OverVoltage",
+        7: "Motor Overload",
+        8: "Heatsink OverTemp",
+        9: "Thermister OverTemp",
+        10: "Dynamic Brake OverTemp",
+        12: "Hardware OverCurrent",
+        13: "Ground Fault",
+        14: "Ground Warning",
+        15: "Load Loss",
+        17: "Input Phase Loss",
+        18: "Motor PTC Trip",
+        19: "Task Overrun",
+        20: "Torque Prove Speed Band",
+        21: "Output Phase Loss",
+        24: "Decel Inhibit",
+        25: "OverSpeed Limit",
+        26: "Brake Slipped",
+        27: "Torque Prove Conflict",
+        28: "TP Encls Confict",
+        29: "Analog In Loss",
+        33: "Auto Restarts Exhausted",
+        35: "IPM OverCurrent",
+        36: "SW OverCurrent",
+        38: "Phase U to Ground",
+        39: "Phase V to Ground",
+        40: "Phase W to Ground",
+        41: "Phase UV Short",
+        42: "Phase VW Short",
+        43: "Phase WU Short",
+        44: "Phase UNeg to Ground",
+        45: "Phase VNeg to Ground",
+        46: "Phase WNeg to Ground",
+        48: "System Defaulted",
+        49: "Drive Powerup",
+        51: "Clear Fault Queue",
+        55: "Control Board Overtemp",
+        59: "Invalid Code",
+        61: "Shear Pin 1",
+        62: "Shear Pin 2",
+        64: "Drive Overload",
+        66: "OW Torque Level",
+        67: "Pump Off",
+        71: "Port 1 Adapter",
+        72: "Port 2 Adapter",
+        73: "Port 3 Adapter",
+        74: "Port 4 Adapter",
+        75: "Port 5 Adapter",
+        76: "Port 6 Adapter",
+        77: "IR Volts Range",
+        78: "FluxAmps Ref Range",
+        79: "Excessive Load",
+        80: "AutoTune Aborted",
+        81: "Port 1 DPI Loss",
+        82: "Port 2 DPI Loss",
+        83: "Port 3 DPI Loss",
+        84: "Port 4 DPI Loss",
+        85: "Port 5 DPI Loss",
+        86: "Port 6 DPI Loss",
+        87: "IXo Voltage Range",
+        91: "Primary Velocity Feedback Loss",
+        93: "Hardware Enable Check",
+        94: "Alternate Velocity Feedback Loss",
+        95: "Auxiliary Velocity Feedback Loss",
+        96: "Position Feedback Loss",
+        97: "Auto Tach Switch",
+        100: "Parameter Checksum",
+        101: "Power Down NVS Blank",
+        102: "NVS Not Blank",
+        103: "Power Down NVS Incompatible",
+        104: "Power Board Checksum",
+        106: "Incompat MCB-PB",
+        107: "Replaced MCB-PB",
+        108: "Analog Calibration Checksum",
+        110: "Invalid Power Board Data",
+        111: "Power Board Invalid ID",
+        112: "Power Board App Min Version",
+        113: "Tracking DataError",
+        115: "Power Down Table Full",
+        116: "Power Down Entry Too Large",
+        117: "Power Down Data Checksum",
+        118: "Power Board Power Down Checksum",
+        124: "App ID Changed",
+        125: "Using Backup App",
+        134: "Start on Power Up",
+        137: "External Precharge Error",
+        138: "Precharge Open",
+        141: "Autotune Enc Angle",
+        142: "Autotune Speed Restricted",
+        143: "Autotune Current Regulator",
+        144: "Autotune Inertia",
+        145: "Autotune Travel",
+        13035: "Net IO Timeout",
+        13037: "Net IO Timeout"
+
+    }
+
+    external_commands = {
+        0: "HP Control",
+        1: "Customer Control"
+    }
+
+    remote_comm = {
+        0: "Good",
+        1: "Comms Failure"
+    }
+
+    aux_pump_hand = {
+        0: "Off",
+        1: "On"
+    }
+
+    aux_pump_auto = {
+        0: "Off",
+        1: "On"
+    }
+
+    aux_pump_run = {
+        0: "Stopped",
+        1: "Running"
+    }
+
+    aux_pump_fault = {
+        0: "Good",
+        1: "Faulted"
+    }
+
+
+    plc_tags = {
+        "external_commands": external_commands.get(value, "Invalid Code"),
+        "remote_comm": remote_comm.get(value, "Invalid Code"),
+        "aux_pump_hand": aux_pump_hand.get(value, "Invalid Code"),
+        "aux_pump_auto": aux_pump_auto.get(value, "Invalid Code"),
+        "aux_pump_run": aux_pump_run.get(value, "Invalid Code"),
+        "aux_pump_fault": aux_pump_fault.get(value, "Invalid Code"),
+        "wellstatus": well_status_codes.get(value, "Invalid Code"),
+        "pidcontrolmode": pid_control_codes.get(value, "Invalid Code"),
+        "downholesensorstatus": downhole_codes.get(value, "Invalid Code"),
+        "alarmflowrate": alarm_codes.get(value, "Invalid Code"),
+        "alarmintakepressure": alarm_codes.get(value, "Invalid Code"),
+        "alarmintaketemperature": alarm_codes.get(value, "Invalid Code"),
+        "alarmtubingpressure": alarm_codes.get(value, "Invalid Code"),
+        "alarmvfd": alarm_codes.get(value, "Invalid Code"),
+        "alarmlockout": alarm_vfd_codes.get(value, "Invalid Code"),
+        "alarmfluidlevel": alarm_codes.get(value, "Invalid Code"),
+        "runpermissive": permissive_codes.get(value, "Invalid Code"),
+        "startpermissive": permissive_codes.get(value, "Invalid Code"),
+        "last_vfd_fault_code": vfd_fault_codes.get(value, "Invalid Code"),
+        "vfd_fault": vfd_fault_codes.get(value, "Invalid Code")
+    }
+
+    return plc_tags.get(plc_tag, "Invalid Tag")
+
+    

Pub_Sub/advvfdipp/guidon/v2/sub/receiveCommand.py

@@ -0,0 +1,255 @@
+# Enter your python code.
+import json
+from quickfaas.measure  import recall
+from common.Logger import logger
+
+def sync(mac,value, wizard_api):
+    #get new values and send
+    try:
+        data = recall()#json.loads(recall().decode("utf-8"))
+    except Exception as e:
+        logger.error(e)
+    logger.info(data)
+    for controller in data:
+        for measure in controller["measures"]:
+            #publish measure
+            topic = "meshify/db/194/_/advvfdipp/" + mac + "/" + measure["name"]
+            if measure["name"] in ["wellstatus","pidcontrolmode","downholesensorstatus","alarmflowrate","alarmintakepressure","alarmintaketemperature","alarmtubingpressure","alarmvfd","alarmlockout","alarmfluidlevel","runpermissive","startpermissive","last_vfd_fault_code","vfd_fault", "external_commands", "remote_comm", "aux_pump_hand","aux_pump_auto","aux_pump_run", "aux_pump_fault"]:
+                payload = [{"value": convert_int(measure["name"], measure["value"])}]
+            else:
+                payload = [{"value": measure["value"]}]
+            logger.debug("Sending on topic: {}".format(topic))
+            logger.debug("Sending value: {}".format(payload))
+            wizard_api.mqtt_publish(topic, json.dumps(payload))
+def writeplctag(mac, value, wizard_api):
+    try:
+        value = json.loads(value.replace("'",'"'))
+        logger.debug(value)
+        message = {"advvfdipp":{value["tag"]: value["val"]}}
+        wizard_api.write_plc_values(message)
+    except Exception as e:
+        logger.debug(e)
+    
+def receiveCommand(topic, payload, wizard_api):
+    logger.debug(topic)
+    logger.debug(json.loads(payload))
+    p = json.loads(payload)[0]
+    command = p["payload"]["name"].split(".")[1]
+    commands = {
+        "sync": sync,
+        "writeplctag": writeplctag,
+    }
+    commands[command](p["mac"].lower(),p["payload"]["value"], wizard_api)
+    #logger.debug(command)
+    ack(p["msgId"], p["mac"], p["payload"]["name"].split(".")[1], p["payload"]["value"], wizard_api)
+
+def ack(msgid, mac, name, value, wizard_api):
+    #logger.debug(mac)
+    mac = "".join(mac.split(":")[:-2])
+    #logger.debug(msgid)
+    #logger.debug(mac)
+    #logger.debug(name)
+    #logger.debug(value)
+    wizard_api.mqtt_publish("meshify/responses/" + str(msgid), json.dumps([{"value": "{} Success Setting: {} To: {}".format(mac,name, value), "msgid": str(msgid)}]))
+
+def convert_int(plc_tag, value):
+    well_status_codes = {
+        0: "Running",
+        1: "Pumped Off",
+        2: "Alarmed",
+        3: "Locked Out",
+        4: "Stopped"
+    }
+
+    pid_control_codes = {
+        0: "Flow",
+        1: "Fluid Level",
+        2: "Tubing Pressure",
+        3: "Manual"
+    }
+
+    downhole_codes = {
+        0: "OK",
+        1: "Connecting",
+        2: "Open Circuit",
+        3: "Shorted",
+        4: "Cannot Decode"
+    }
+
+    permissive_codes = {
+        0: "OK",
+        1: "Flow",
+        2: "Intake Pressure",
+        3: "Intake Temperature",
+        4: "Tubing Pressure",
+        5: "VFD",
+        6: "Fluid Level",
+        7: "Min. Downtime"
+    }
+
+    alarm_codes = {
+        0: "OK",
+        1: "Alarm"
+    }
+
+    alarm_vfd_codes = {
+        0: "OK",
+        1: "Locked Out"
+    }
+
+    vfd_fault_codes = {
+        0: "No Fault",
+        2: "Auxiliary Input",
+        3: "Power Loss",
+        4: "UnderVoltage",
+        5: "OverVoltage",
+        7: "Motor Overload",
+        8: "Heatsink OverTemp",
+        9: "Thermister OverTemp",
+        10: "Dynamic Brake OverTemp",
+        12: "Hardware OverCurrent",
+        13: "Ground Fault",
+        14: "Ground Warning",
+        15: "Load Loss",
+        17: "Input Phase Loss",
+        18: "Motor PTC Trip",
+        19: "Task Overrun",
+        20: "Torque Prove Speed Band",
+        21: "Output Phase Loss",
+        24: "Decel Inhibit",
+        25: "OverSpeed Limit",
+        26: "Brake Slipped",
+        27: "Torque Prove Conflict",
+        28: "TP Encls Confict",
+        29: "Analog In Loss",
+        33: "Auto Restarts Exhausted",
+        35: "IPM OverCurrent",
+        36: "SW OverCurrent",
+        38: "Phase U to Ground",
+        39: "Phase V to Ground",
+        40: "Phase W to Ground",
+        41: "Phase UV Short",
+        42: "Phase VW Short",
+        43: "Phase WU Short",
+        44: "Phase UNeg to Ground",
+        45: "Phase VNeg to Ground",
+        46: "Phase WNeg to Ground",
+        48: "System Defaulted",
+        49: "Drive Powerup",
+        51: "Clear Fault Queue",
+        55: "Control Board Overtemp",
+        59: "Invalid Code",
+        61: "Shear Pin 1",
+        62: "Shear Pin 2",
+        64: "Drive Overload",
+        66: "OW Torque Level",
+        67: "Pump Off",
+        71: "Port 1 Adapter",
+        72: "Port 2 Adapter",
+        73: "Port 3 Adapter",
+        74: "Port 4 Adapter",
+        75: "Port 5 Adapter",
+        76: "Port 6 Adapter",
+        77: "IR Volts Range",
+        78: "FluxAmps Ref Range",
+        79: "Excessive Load",
+        80: "AutoTune Aborted",
+        81: "Port 1 DPI Loss",
+        82: "Port 2 DPI Loss",
+        83: "Port 3 DPI Loss",
+        84: "Port 4 DPI Loss",
+        85: "Port 5 DPI Loss",
+        86: "Port 6 DPI Loss",
+        87: "IXo Voltage Range",
+        91: "Primary Velocity Feedback Loss",
+        93: "Hardware Enable Check",
+        94: "Alternate Velocity Feedback Loss",
+        95: "Auxiliary Velocity Feedback Loss",
+        96: "Position Feedback Loss",
+        97: "Auto Tach Switch",
+        100: "Parameter Checksum",
+        101: "Power Down NVS Blank",
+        102: "NVS Not Blank",
+        103: "Power Down NVS Incompatible",
+        104: "Power Board Checksum",
+        106: "Incompat MCB-PB",
+        107: "Replaced MCB-PB",
+        108: "Analog Calibration Checksum",
+        110: "Invalid Power Board Data",
+        111: "Power Board Invalid ID",
+        112: "Power Board App Min Version",
+        113: "Tracking DataError",
+        115: "Power Down Table Full",
+        116: "Power Down Entry Too Large",
+        117: "Power Down Data Checksum",
+        118: "Power Board Power Down Checksum",
+        124: "App ID Changed",
+        125: "Using Backup App",
+        134: "Start on Power Up",
+        137: "External Precharge Error",
+        138: "Precharge Open",
+        141: "Autotune Enc Angle",
+        142: "Autotune Speed Restricted",
+        143: "Autotune Current Regulator",
+        144: "Autotune Inertia",
+        145: "Autotune Travel",
+        13035: "Net IO Timeout",
+        13037: "Net IO Timeout"
+
+    }
+
+    external_commands = {
+        0: "HP Control",
+        1: "Customer Control"
+    }
+
+    remote_comm = {
+        0: "Good",
+        1: "Comms Failure"
+    }
+
+    aux_pump_hand = {
+        0: "Off",
+        1: "On"
+    }
+
+    aux_pump_auto = {
+        0: "Off",
+        1: "On"
+    }
+
+    aux_pump_run = {
+        0: "Stopped",
+        1: "Running"
+    }
+
+    aux_pump_fault = {
+        0: "Good",
+        1: "Faulted"
+    }
+
+
+    plc_tags = {
+        "external_commands": external_commands.get(value, "Invalid Code"),
+        "remote_comm": remote_comm.get(value, "Invalid Code"),
+        "aux_pump_hand": aux_pump_hand.get(value, "Invalid Code"),
+        "aux_pump_auto": aux_pump_auto.get(value, "Invalid Code"),
+        "aux_pump_run": aux_pump_run.get(value, "Invalid Code"),
+        "aux_pump_fault": aux_pump_fault.get(value, "Invalid Code"),
+        "wellstatus": well_status_codes.get(value, "Invalid Code"),
+        "pidcontrolmode": pid_control_codes.get(value, "Invalid Code"),
+        "downholesensorstatus": downhole_codes.get(value, "Invalid Code"),
+        "alarmflowrate": alarm_codes.get(value, "Invalid Code"),
+        "alarmintakepressure": alarm_codes.get(value, "Invalid Code"),
+        "alarmintaketemperature": alarm_codes.get(value, "Invalid Code"),
+        "alarmtubingpressure": alarm_codes.get(value, "Invalid Code"),
+        "alarmvfd": alarm_codes.get(value, "Invalid Code"),
+        "alarmlockout": alarm_vfd_codes.get(value, "Invalid Code"),
+        "alarmfluidlevel": alarm_codes.get(value, "Invalid Code"),
+        "runpermissive": permissive_codes.get(value, "Invalid Code"),
+        "startpermissive": permissive_codes.get(value, "Invalid Code"),
+        "last_vfd_fault_code": vfd_fault_codes.get(value, "Invalid Code"),
+        "vfd_fault": vfd_fault_codes.get(value, "Invalid Code")
+    }
+
+    return plc_tags.get(plc_tag, "Invalid Tag")

Pub_Sub/advvfdipp/v1/device_supervisor_advvfdippv1.cfg

@@ -957,6 +957,10 @@
   {
    "key": "MAC_UPPER",
    "value": "00:18:05:1A:E5:37"
+  },
+  {
+      "key": "MAC_LOWER",
+      "value": "00:18:05:1a:e5:37"
   }
  ],
  "quickfaas": {
@@ -965,7 +969,7 @@
    {
     "name": "Send Data",
     "trigger": "measure_event",
-    "topic": "meshify/db/194/_/advvfdipp/",
+    "topic": "meshify/db/194/_/advvfdipp/${MAC_LOWER}",
     "qos": 1,
     "groups": [
      "default"

Pub_Sub/advvfdipp/v2/pub/sendData.py

@@ -26,7 +26,7 @@ def lwt(mac):
 
 def sendData(message):
     #logger.debug(message)
-    mac = ':'.join(re.findall('..', '%012x' % uuid.getnode()))
+    mac = __topic__.split("/")[-1] #':'.join(re.findall('..', '%012x' % uuid.getnode()))
     lwt(mac)
     for measure in message["measures"]:
         try:
@@ -35,9 +35,9 @@ def sendData(message):
                 logger.debug("Converting DINT/BOOL to STRING")
                 value = convert_int(measure["name"], measure["value"])
                 logger.debug("Converted {} to {}".format(measure["value"], value))
-                publish(__topic__ + mac + ":01:99/" + measure["name"], json.dumps({"value": value}), __qos__)
+                publish(__topic__ + ":01:99/" + measure["name"], json.dumps({"value": value}), __qos__)
             else:
-                publish(__topic__ + mac + ":01:99/" + measure["name"], json.dumps({"value": measure["value"]}), __qos__)
+                publish(__topic__ + ":01:99/" + measure["name"], json.dumps({"value": measure["value"]}), __qos__)
         except Exception as e:
             logger.error(e)
         

Pub_Sub/convert_config.py

@@ -30,11 +30,11 @@ def write_config(path, config, pub, sub):
         json.dump(config, f, indent=4)
 
 root = os.getcwd()
-devicetype = "rigpump"
+devicetype = "advvfdipp"
-startversion = 3
+startversion = 1
 deviceconfig = "device_supervisor_" + devicetype +"v" + str(startversion) + ".cfg"
 
 #write_code(root + "/" + devicetype + "/v" + str(startversion) + "/pub" + "/sendData.py", get_config_pub(root + "/" + devicetype + "/v" + str(startversion) + "/" + deviceconfig))
 #write_code(root + "/" + devicetype + "/v" + str(startversion) + "/sub" + "/receiveCommand.py", get_config_sub(root + "/" + devicetype + "/v" + str(startversion) + "/" + deviceconfig))
 
-write_config(root + "/" + devicetype + "/v" + str(startversion + 1) + "/device_supervisor_" + devicetype + "v" + str(startversion + 1) + ".cfg", get_config(root + "/" + devicetype + "/v" + str(startversion) + "/device_supervisor_" + devicetype + "v" + str(startversion) + ".cfg"), code_to_string(root + "/" + devicetype + "/v" + str(startversion + 1) + "/pub" + "/sendData.py"), code_to_string(root + "/" + devicetype + "/v" + str(startversion + 1) + "/sub" + "/receiveCommand.py"))
+write_config(root + "/" + devicetype + "/guidon/v" + str(startversion + 1) + "/device_supervisor_" + devicetype + "v" + str(startversion + 1) + ".cfg", get_config(root + "/" + devicetype + "/guidon/v" + str(startversion) + "/device_supervisor_" + devicetype + "v" + str(startversion) + ".cfg"), code_to_string(root + "/" + devicetype + "/guidon/v" + str(startversion + 1) + "/pub" + "/sendData.py"), code_to_string(root + "/" + devicetype + "/guidon/v" + str(startversion + 1) + "/sub" + "/receiveCommand.py"))

Pub_Sub/recycle_train/v1/device_supervisor_recycle_trainv1.cfg

@@ -685,7 +685,7 @@
    {
     "name": "Send Data",
     "trigger": "measure_event",
-    "topic": "meshify/db/194/_/recycle_train/",
+    "topic": "meshify/db/194/_/recycle_train/${MAC_LOWER}",
     "qos": 1,
     "groups": [
      "default"
@@ -722,6 +722,10 @@
   {
    "key": "MAC_UPPER",
    "value": "00:18:05:1A:E5:37"
+  },
+  {
+      "key": "MAC_LOWER",
+      "value": "00:18:05:1a:e5:37"
   }
  ],
  "modbusSlave": {

Pub_Sub/recycle_train/v2/device_supervisor_recycle_trainv2.cfg

@@ -685,13 +685,13 @@
             {
                 "name": "Send Data",
                 "trigger": "measure_event",
-                "topic": "meshify/db/194/_/recycle_train/",
+                "topic": "meshify/db/194/_/recycle_train/${MAC_LOWER}",
                 "qos": 1,
                 "groups": [
                     "default"
                 ],
                 "funcName": "sendData",
-                "script": "# Enter your python code.\nimport json\nfrom common.Logger import logger\nfrom quickfaas.remotebus import publish\nimport re, uuid\nfrom paho.mqtt import client\n\nlwtData = {\n    \"init\":False,\n    \"client\": client.Client(client_id=str(uuid.uuid4()), clean_session=True, userdata=None, protocol=client.MQTTv311, transport=\"tcp\")\n}\ndef lwt(mac):\n    try:\n        #if not lwtData[\"connected\"]:\n        if not lwtData[\"init\"]:\n            logger.info(\"INITIALIZING LWT CLIENT\")\n            lwtData[\"client\"].username_pw_set(username=\"admin\", password=\"columbus\")\n            lwtData[\"client\"].will_set(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\",json.dumps({\"value\":False}))\n            lwtData[\"init\"] = True\n            logger.info(\"Connecting to MQTT Broker for LWT purposes!!!!!!!\")\n            lwtData[\"client\"].connect(\"mq194.imistaway.net\",1883, 600)\n        lwtData[\"client\"].publish(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\", json.dumps({\"value\":True}))\n    except Exception as e:\n        logger.error(\"LWT DID NOT DO THE THING\")\n        logger.error(e)\n\ndef sendData(message):\n    #logger.debug(message)\n    mac = ':'.join(re.findall('..', '%012x' % uuid.getnode()))\n    lwt(mac)\n    for measure in message[\"measures\"]:\n        try:\n            logger.debug(measure)\n            publish(__topic__ + mac + \":01:99/\" + measure[\"name\"], json.dumps({\"value\": measure[\"value\"]}), __qos__)\n        except Exception as e:\n            logger.error(e)\n        \n        #publish(__topic__, json.dumps({measure[\"name\"]: measure[\"value\"]}), __qos__)\n\n\n    ",
+                "script": "# Enter your python code.\nimport json\nfrom common.Logger import logger\nfrom quickfaas.remotebus import publish\nimport re, uuid\nfrom paho.mqtt import client\n\nlwtData = {\n    \"init\":False,\n    \"client\": client.Client(client_id=str(uuid.uuid4()), clean_session=True, userdata=None, protocol=client.MQTTv311, transport=\"tcp\")\n}\ndef lwt(mac):\n    try:\n        #if not lwtData[\"connected\"]:\n        if not lwtData[\"init\"]:\n            logger.info(\"INITIALIZING LWT CLIENT\")\n            lwtData[\"client\"].username_pw_set(username=\"admin\", password=\"columbus\")\n            lwtData[\"client\"].will_set(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\",json.dumps({\"value\":False}))\n            lwtData[\"init\"] = True\n            logger.info(\"Connecting to MQTT Broker for LWT purposes!!!!!!!\")\n            lwtData[\"client\"].connect(\"mq194.imistaway.net\",1883, 600)\n        lwtData[\"client\"].publish(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\", json.dumps({\"value\":True}))\n    except Exception as e:\n        logger.error(\"LWT DID NOT DO THE THING\")\n        logger.error(e)\n\ndef sendData(message):\n    #logger.debug(message)\n    mac = __topic__.split(\"/\")[-1] #':'.join(re.findall('..', '%012x' % uuid.getnode()))\n    lwt(mac)\n    for measure in message[\"measures\"]:\n        try:\n            logger.debug(measure)\n            publish(__topic__ + \":01:99/\" + measure[\"name\"], json.dumps({\"value\": measure[\"value\"]}), __qos__)\n        except Exception as e:\n            logger.error(e)\n        \n        #publish(__topic__, json.dumps({measure[\"name\"]: measure[\"value\"]}), __qos__)\n\n\n    ",
                 "cloudName": "default",
                 "msgType": 0
             }
@@ -703,7 +703,7 @@
                 "qos": 1,
                 "funcName": "receiveCommand",
                 "payload_type": "Plaintext",
-                "script": "# Enter your python code.\nimport json\nfrom quickfaas.measure  import recall\nfrom common.Logger import logger\n\ndef sync(mac,value, wizard_api):\n    #get new values and send\n    try:\n        data = recall()#json.loads(recall().decode(\"utf-8\"))\n    except Exception as e:\n        logger.error(e)\n    logger.info(data)\n    for controller in data:\n        for measure in controller[\"measures\"]:\n            #publish measure\n            topic = \"meshify/db/194/_/rigpump/\" + mac + \"/\" + measure[\"name\"]\n            payload = [{\"value\": measure[\"value\"]}]\n            logger.debug(\"Sending on topic: {}\".format(topic))\n            logger.debug(\"Sending value: {}\".format(payload))\n            wizard_api.mqtt_publish(topic, json.dumps(payload))\ndef writeplctag(mac, value, wizard_api):\n    try:\n        value = json.loads(value.replace(\"'\",'\"'))\n        logger.debug(value)\n        message = {\"rigpump\":{value[\"tag\"]: value[\"val\"]}}\n        wizard_api.write_plc_values(message)\n    except Exception as e:\n        logger.debug(e)\n    \ndef receiveCommand(topic, payload, wizard_api):\n    logger.debug(topic)\n    logger.debug(json.loads(payload))\n    p = json.loads(payload)[0]\n    command = p[\"payload\"][\"name\"].split(\".\")[1]\n    commands = {\n        \"sync\": sync,\n        \"writeplctag\": writeplctag,\n    }\n    commands[command](p[\"mac\"].lower(),p[\"payload\"][\"value\"], wizard_api)\n    #logger.debug(command)\n    ack(p[\"msgId\"], p[\"mac\"], p[\"payload\"][\"name\"].split(\".\")[1], p[\"payload\"][\"value\"], wizard_api)\n\ndef ack(msgid, mac, name, value, wizard_api):\n    #logger.debug(mac)\n    mac = \"\".join(mac.split(\":\")[:-2])\n    #logger.debug(msgid)\n    #logger.debug(mac)\n    #logger.debug(name)\n    #logger.debug(value)\n    wizard_api.mqtt_publish(\"meshify/responses/\" + str(msgid), json.dumps([{\"value\": \"{} Success Setting: {} To: {}\".format(mac,name, value), \"msgid\": str(msgid)}]))",
+                "script": "# Enter your python code.\nimport json\nfrom quickfaas.measure  import recall\nfrom common.Logger import logger\n\ndef sync(mac,value, wizard_api):\n    #get new values and send\n    try:\n        data = recall()#json.loads(recall().decode(\"utf-8\"))\n    except Exception as e:\n        logger.error(e)\n    logger.info(data)\n    for controller in data:\n        for measure in controller[\"measures\"]:\n            #publish measure\n            topic = \"meshify/db/194/_/recycle_train/\" + mac + \"/\" + measure[\"name\"]\n            payload = [{\"value\": measure[\"value\"]}]\n            logger.debug(\"Sending on topic: {}\".format(topic))\n            logger.debug(\"Sending value: {}\".format(payload))\n            wizard_api.mqtt_publish(topic, json.dumps(payload))\ndef writeplctag(mac, value, wizard_api):\n    try:\n        value = json.loads(value.replace(\"'\",'\"'))\n        logger.debug(value)\n        message = {\"recycle_train\":{value[\"tag\"]: value[\"val\"]}}\n        wizard_api.write_plc_values(message)\n    except Exception as e:\n        logger.debug(e)\n    \ndef receiveCommand(topic, payload, wizard_api):\n    logger.debug(topic)\n    logger.debug(json.loads(payload))\n    p = json.loads(payload)[0]\n    command = p[\"payload\"][\"name\"].split(\".\")[1]\n    commands = {\n        \"sync\": sync,\n        \"writeplctag\": writeplctag,\n    }\n    commands[command](p[\"mac\"].lower(),p[\"payload\"][\"value\"], wizard_api)\n    #logger.debug(command)\n    ack(p[\"msgId\"], p[\"mac\"], p[\"payload\"][\"name\"].split(\".\")[1], p[\"payload\"][\"value\"], wizard_api)\n\ndef ack(msgid, mac, name, value, wizard_api):\n    #logger.debug(mac)\n    mac = \"\".join(mac.split(\":\")[:-2])\n    #logger.debug(msgid)\n    #logger.debug(mac)\n    #logger.debug(name)\n    #logger.debug(value)\n    wizard_api.mqtt_publish(\"meshify/responses/\" + str(msgid), json.dumps([{\"value\": \"{} Success Setting: {} To: {}\".format(mac,name, value), \"msgid\": str(msgid)}]))",
                 "msgType": 0,
                 "trigger": "command_event",
                 "cloudName": "default"
@@ -722,6 +722,10 @@
         {
             "key": "MAC_UPPER",
             "value": "00:18:05:1A:E5:37"
+        },
+        {
+            "key": "MAC_LOWER",
+            "value": "00:18:05:1a:e5:37"
         }
     ],
     "modbusSlave": {

Pub_Sub/recycle_train/v2/pub/sendData.py

@@ -26,12 +26,12 @@ def lwt(mac):
 
 def sendData(message):
     #logger.debug(message)
-    mac = ':'.join(re.findall('..', '%012x' % uuid.getnode()))
+    mac = __topic__.split("/")[-1] #':'.join(re.findall('..', '%012x' % uuid.getnode()))
     lwt(mac)
     for measure in message["measures"]:
         try:
             logger.debug(measure)
-            publish(__topic__ + mac + ":01:99/" + measure["name"], json.dumps({"value": measure["value"]}), __qos__)
+            publish(__topic__ + ":01:99/" + measure["name"], json.dumps({"value": measure["value"]}), __qos__)
         except Exception as e:
             logger.error(e)
         

Pub_Sub/recycle_train/v2/sub/receiveCommand.py

@@ -13,7 +13,7 @@ def sync(mac,value, wizard_api):
     for controller in data:
         for measure in controller["measures"]:
             #publish measure
-            topic = "meshify/db/194/_/rigpump/" + mac + "/" + measure["name"]
+            topic = "meshify/db/194/_/recycle_train/" + mac + "/" + measure["name"]
             payload = [{"value": measure["value"]}]
             logger.debug("Sending on topic: {}".format(topic))
             logger.debug("Sending value: {}".format(payload))
@@ -22,7 +22,7 @@ def writeplctag(mac, value, wizard_api):
     try:
         value = json.loads(value.replace("'",'"'))
         logger.debug(value)
-        message = {"rigpump":{value["tag"]: value["val"]}}
+        message = {"recycle_train":{value["tag"]: value["val"]}}
         wizard_api.write_plc_values(message)
     except Exception as e:
         logger.debug(e)

Pub_Sub/rigpump/v3/device_supervisor_rigpumpv3.cfg

@@ -281,7 +281,7 @@
    {
     "name": "Send Data",
     "trigger": "measure_event",
-    "topic": "meshify/db/194/_/rigpump/",
+    "topic": "meshify/db/194/_/rigpump/${MAC_LOWER}",
     "qos": 1,
     "groups": [
      "default"
@@ -318,6 +318,10 @@
   {
    "key": "MAC_UPPER",
    "value": "00:18:05:1A:E5:37"
+  },
+  {
+      "key": "MAC_LOWER",
+      "value": "00:18:05:1a:e5:37"
   }
  ],
  "modbusSlave": {

Pub_Sub/rigpump/v4/device_supervisor_rigpumpv4.cfg

@@ -281,13 +281,13 @@
             {
                 "name": "Send Data",
                 "trigger": "measure_event",
-                "topic": "meshify/db/194/_/rigpump/",
+                "topic": "meshify/db/194/_/rigpump/${MAC_LOWER}",
                 "qos": 1,
                 "groups": [
                     "default"
                 ],
                 "funcName": "sendData",
-                "script": "# Enter your python code.\nimport json\nfrom common.Logger import logger\nfrom quickfaas.remotebus import publish\nimport re, uuid\nfrom paho.mqtt import client\n\nlwtData = {\n    \"init\":False,\n    \"client\": client.Client(client_id=str(uuid.uuid4()), clean_session=True, userdata=None, protocol=client.MQTTv311, transport=\"tcp\")\n}\ndef lwt(mac):\n    try:\n        #if not lwtData[\"connected\"]:\n        if not lwtData[\"init\"]:\n            logger.info(\"INITIALIZING LWT CLIENT\")\n            lwtData[\"client\"].username_pw_set(username=\"admin\", password=\"columbus\")\n            lwtData[\"client\"].will_set(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\",json.dumps({\"value\":False}))\n            lwtData[\"init\"] = True\n            logger.info(\"Connecting to MQTT Broker for LWT purposes!!!!!!!\")\n            lwtData[\"client\"].connect(\"mq194.imistaway.net\",1883, 600)\n        lwtData[\"client\"].publish(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\", json.dumps({\"value\":True}))\n    except Exception as e:\n        logger.error(\"LWT DID NOT DO THE THING\")\n        logger.error(e)\n\ndef sendData(message):\n    #logger.debug(message)\n    mac = ':'.join(re.findall('..', '%012x' % uuid.getnode()))\n    lwt(mac)\n    for measure in message[\"measures\"]:\n        try:\n            logger.debug(measure)\n            if measure[\"name\"] in [\"auto_manual\", \"auto_control_mode\", \"device_status\"]:\n                logger.debug(\"Converting DINT/BOOL to STRING\")\n                value = convert_int(measure[\"name\"], measure[\"value\"])\n                logger.debug(\"Converted {} to {}\".format(measure[\"value\"], value))\n                publish(__topic__ + mac + \":01:99/\" + measure[\"name\"], json.dumps({\"value\": value}), __qos__)\n            else:\n                publish(__topic__ + mac + \":01:99/\" + measure[\"name\"], json.dumps({\"value\": measure[\"value\"]}), __qos__)\n        except Exception as e:\n            logger.error(e)\n        \n        #publish(__topic__, json.dumps({measure[\"name\"]: measure[\"value\"]}), __qos__)\n\ndef convert_int(plc_tag, value):\n    auto_manual = {\n        0: \"Manual\",\n        1: \"Auto\"\n    }\n\n    auto_control_mode = {\n        0: \"Pressure\",\n        1: \"Flow\"\n    }\n\n    device_status = {\n        1: \"Running\",\n        64: \"Idle\",\n        128: \"Overpressure\",\n        1024: \"Faulted\"\n    }\n    \n    plc_tags = {\n        \"auto_manual\": auto_manual.get(value, \"Invalid Code\"),\n        \"auto_control_mode\": auto_control_mode.get(value, \"Invalid Code\"),\n        \"device_status\": device_status.get(value, \"Invalid Code\"),\n    }\n\n    return plc_tags.get(plc_tag, \"Invalid Tag\")\n\n    ",
+                "script": "# Enter your python code.\nimport json\nfrom common.Logger import logger\nfrom quickfaas.remotebus import publish\nimport re, uuid\nfrom paho.mqtt import client\n\nlwtData = {\n    \"init\":False,\n    \"client\": client.Client(client_id=str(uuid.uuid4()), clean_session=True, userdata=None, protocol=client.MQTTv311, transport=\"tcp\")\n}\ndef lwt(mac):\n    try:\n        #if not lwtData[\"connected\"]:\n        if not lwtData[\"init\"]:\n            logger.info(\"INITIALIZING LWT CLIENT\")\n            lwtData[\"client\"].username_pw_set(username=\"admin\", password=\"columbus\")\n            lwtData[\"client\"].will_set(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\",json.dumps({\"value\":False}))\n            lwtData[\"init\"] = True\n            logger.info(\"Connecting to MQTT Broker for LWT purposes!!!!!!!\")\n            lwtData[\"client\"].connect(\"mq194.imistaway.net\",1883, 600)\n        lwtData[\"client\"].publish(\"meshify/db/194/_/mainHP/\" + mac + \":00:00/connected\", json.dumps({\"value\":True}))\n    except Exception as e:\n        logger.error(\"LWT DID NOT DO THE THING\")\n        logger.error(e)\n\ndef sendData(message):\n    #logger.debug(message)\n    mac = __topic__.split(\"/\")[-1] #':'.join(re.findall('..', '%012x' % uuid.getnode()))\n    lwt(mac)\n    for measure in message[\"measures\"]:\n        try:\n            logger.debug(measure)\n            if measure[\"name\"] in [\"auto_manual\", \"auto_control_mode\", \"device_status\"]:\n                logger.debug(\"Converting DINT/BOOL to STRING\")\n                value = convert_int(measure[\"name\"], measure[\"value\"])\n                logger.debug(\"Converted {} to {}\".format(measure[\"value\"], value))\n                publish(__topic__ + \":01:99/\" + measure[\"name\"], json.dumps({\"value\": value}), __qos__)\n            else:\n                publish(__topic__ + \":01:99/\" + measure[\"name\"], json.dumps({\"value\": measure[\"value\"]}), __qos__)\n        except Exception as e:\n            logger.error(e)\n        \n        #publish(__topic__, json.dumps({measure[\"name\"]: measure[\"value\"]}), __qos__)\n\ndef convert_int(plc_tag, value):\n    auto_manual = {\n        0: \"Manual\",\n        1: \"Auto\"\n    }\n\n    auto_control_mode = {\n        0: \"Pressure\",\n        1: \"Flow\"\n    }\n\n    device_status = {\n        1: \"Running\",\n        64: \"Idle\",\n        128: \"Overpressure\",\n        1024: \"Faulted\"\n    }\n    \n    plc_tags = {\n        \"auto_manual\": auto_manual.get(value, \"Invalid Code\"),\n        \"auto_control_mode\": auto_control_mode.get(value, \"Invalid Code\"),\n        \"device_status\": device_status.get(value, \"Invalid Code\"),\n    }\n\n    return plc_tags.get(plc_tag, \"Invalid Tag\")\n\n    ",
                 "cloudName": "default",
                 "msgType": 0
             }
@@ -318,6 +318,10 @@
         {
             "key": "MAC_UPPER",
             "value": "00:18:05:1A:E5:37"
+        },
+        {
+            "key": "MAC_LOWER",
+            "value": "00:18:05:1a:e5:37"
         }
     ],
     "modbusSlave": {

Pub_Sub/rigpump/v4/pub/sendData.py

@@ -26,7 +26,7 @@ def lwt(mac):
 
 def sendData(message):
     #logger.debug(message)
-    mac = ':'.join(re.findall('..', '%012x' % uuid.getnode()))
+    mac = __topic__.split("/")[-1] #':'.join(re.findall('..', '%012x' % uuid.getnode()))
     lwt(mac)
     for measure in message["measures"]:
         try:
@@ -35,9 +35,9 @@ def sendData(message):
                 logger.debug("Converting DINT/BOOL to STRING")
                 value = convert_int(measure["name"], measure["value"])
                 logger.debug("Converted {} to {}".format(measure["value"], value))
-                publish(__topic__ + mac + ":01:99/" + measure["name"], json.dumps({"value": value}), __qos__)
+                publish(__topic__ + ":01:99/" + measure["name"], json.dumps({"value": value}), __qos__)
             else:
-                publish(__topic__ + mac + ":01:99/" + measure["name"], json.dumps({"value": measure["value"]}), __qos__)
+                publish(__topic__ + ":01:99/" + measure["name"], json.dumps({"value": measure["value"]}), __qos__)
         except Exception as e:
             logger.error(e)