nmelone/HP_InHand_IG502
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

updated code for chunking and reorganized

Browse Source
This commit is contained in:
Nico Melone
2023-12-14 13:16:36 -06:00
parent a75d279bf6
commit 14c29b6718
52 changed files with 7044 additions and 1824 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1221
Pub_Sub/cpadvvfdipp/thingsboard/cpadvvfdipp_tb_v5.cfg Normal file
View File

File diff suppressed because one or more lines are too long

201
Pub_Sub/cpadvvfdipp/thingsboard/pub/sendAlarms.py Normal file
View File

@@ -0,0 +1,201 @@
# Enter your python code.
import json, time
from common.Logger import logger
from quickfaas.remotebus import publish
from quickfaas.measure import recall
def sendAlarm(message):
logger.info(message)
payload = {}
payload["ts"] = time.time()*1000
payload["values"] = {message["measureName"]: message["value"]}
publish(__topic__, json.dumps(payload), __qos__)
sync()
def sync():
#get new values and send
payload = {"ts": time.time()*1000, "values": {}}
try:
data = recall()#json.loads(recall().decode("utf-8"))
except Exception as e:
logger.error(e)
logger.debug(data)
for controller in data:
for measure in controller["measures"]:
#publish measure
if measure["name"] in ["wellstatus","pidcontrolmode","downholesensorstatus","alarmflowrate","alarmintakepressure","alarmintaketemperature","alarmtubingpressure","alarmvfd","alarmlockout","alarmfluidlevel","runpermissive","startpermissive","last_vfd_fault_code","vfd_fault", "flowmeter_fault"]:
payload["values"][measure["name"]] = convert_int(measure["name"], measure["value"])
payload["values"][measure["name"]+ "_int"] = measure["value"]
else:
payload["values"][measure["name"]] = measure["value"]
logger.debug("Sending on topic: {}".format(__topic__))
logger.debug("Sending value: {}".format(payload))
publish(__topic__, json.dumps(payload), 1)
def convert_int(plc_tag, value):
well_status_codes = {
0: "Running",
1: "Pumped Off",
2: "Alarmed",
3: "Locked Out",
4: "Stopped"
}
pid_control_codes = {
0: "Flow",
1: "Fluid Level",
2: "Tubing Pressure",
3: "Manual"
}
downhole_codes = {
0: "OK",
1: "Connecting",
2: "Open Circuit",
3: "Shorted",
4: "Cannot Decode"
}
permissive_codes = {
0: "OK",
1: "Flow",
2: "Intake Pressure",
3: "Intake Temperature",
4: "Tubing Pressure",
5: "VFD",
6: "Fluid Level",
7: "Min. Downtime"
}
alarm_codes = {
0: "OK",
1: "Alarm"
}
alarm_vfd_codes = {
0: "OK",
1: "Locked Out"
}
vfd_fault_codes = {
0: "No Fault",
2: "Auxiliary Input",
3: "Power Loss",
4: "UnderVoltage",
5: "OverVoltage",
7: "Motor Overload",
8: "Heatsink OverTemp",
9: "Thermister OverTemp",
10: "Dynamic Brake OverTemp",
12: "Hardware OverCurrent",
13: "Ground Fault",
14: "Ground Warning",
15: "Load Loss",
17: "Input Phase Loss",
18: "Motor PTC Trip",
19: "Task Overrun",
20: "Torque Prove Speed Band",
21: "Output Phase Loss",
24: "Decel Inhibit",
25: "OverSpeed Limit",
26: "Brake Slipped",
27: "Torque Prove Conflict",
28: "TP Encls Confict",
29: "Analog In Loss",
33: "Auto Restarts Exhausted",
35: "IPM OverCurrent",
36: "SW OverCurrent",
38: "Phase U to Ground",
39: "Phase V to Ground",
40: "Phase W to Ground",
41: "Phase UV Short",
42: "Phase VW Short",
43: "Phase WU Short",
44: "Phase UNeg to Ground",
45: "Phase VNeg to Ground",
46: "Phase WNeg to Ground",
48: "System Defaulted",
49: "Drive Powerup",
51: "Clear Fault Queue",
55: "Control Board Overtemp",
59: "Invalid Code",
61: "Shear Pin 1",
62: "Shear Pin 2",
64: "Drive Overload",
66: "OW Torque Level",
67: "Pump Off",
71: "Port 1 Adapter",
72: "Port 2 Adapter",
73: "Port 3 Adapter",
74: "Port 4 Adapter",
75: "Port 5 Adapter",
76: "Port 6 Adapter",
77: "IR Volts Range",
78: "FluxAmps Ref Range",
79: "Excessive Load",
80: "AutoTune Aborted",
81: "Port 1 DPI Loss",
82: "Port 2 DPI Loss",
83: "Port 3 DPI Loss",
84: "Port 4 DPI Loss",
85: "Port 5 DPI Loss",
86: "Port 6 DPI Loss",
87: "IXo Voltage Range",
91: "Primary Velocity Feedback Loss",
93: "Hardware Enable Check",
94: "Alternate Velocity Feedback Loss",
95: "Auxiliary Velocity Feedback Loss",
96: "Position Feedback Loss",
97: "Auto Tach Switch",
100: "Parameter Checksum",
101: "Power Down NVS Blank",
102: "NVS Not Blank",
103: "Power Down NVS Incompatible",
104: "Power Board Checksum",
106: "Incompat MCB-PB",
107: "Replaced MCB-PB",
108: "Analog Calibration Checksum",
110: "Invalid Power Board Data",
111: "Power Board Invalid ID",
112: "Power Board App Min Version",
113: "Tracking DataError",
115: "Power Down Table Full",
116: "Power Down Entry Too Large",
117: "Power Down Data Checksum",
118: "Power Board Power Down Checksum",
124: "App ID Changed",
125: "Using Backup App",
134: "Start on Power Up",
137: "External Precharge Error",
138: "Precharge Open",
141: "Autotune Enc Angle",
142: "Autotune Speed Restricted",
143: "Autotune Current Regulator",
144: "Autotune Inertia",
145: "Autotune Travel",
13035: "Net IO Timeout",
13037: "Net IO Timeout"
}
plc_tags = {
"wellstatus": well_status_codes.get(value, "Invalid Code"),
"pidcontrolmode": pid_control_codes.get(value, "Invalid Code"),
"downholesensorstatus": downhole_codes.get(value, "Invalid Code"),
"alarmflowrate": alarm_codes.get(value, "Invalid Code"),
"alarmintakepressure": alarm_codes.get(value, "Invalid Code"),
"alarmintaketemperature": alarm_codes.get(value, "Invalid Code"),
"alarmtubingpressure": alarm_codes.get(value, "Invalid Code"),
"alarmvfd": alarm_codes.get(value, "Invalid Code"),
"alarmlockout": alarm_vfd_codes.get(value, "Invalid Code"),
"alarmfluidlevel": alarm_codes.get(value, "Invalid Code"),
"runpermissive": permissive_codes.get(value, "Invalid Code"),
"startpermissive": permissive_codes.get(value, "Invalid Code"),
"last_vfd_fault_code": vfd_fault_codes.get(value, "Invalid Code"),
"vfd_fault": vfd_fault_codes.get(value, "Invalid Code"),
"flowmeter_fault": alarm_codes.get(value, "Invalid Code")
}
return plc_tags.get(plc_tag, "Invalid Tag")

323
Pub_Sub/cpadvvfdipp/thingsboard/pub/sendData.py Normal file
View File

@@ -0,0 +1,323 @@
# Enter your python code.
import json, os, time
from datetime import datetime as dt
from common.Logger import logger
from quickfaas.remotebus import publish
from quickfaas.global_dict import get as get_params
from quickfaas.global_dict import _set_global_args
def reboot(reason="Rebooting for config file update"):
#basic = Basic()
logger.info("!" * 10 + "REBOOTING DEVICE" + "!"*10)
logger.info(reason)
r = os.popen("kill -s SIGHUP `cat /var/run/python/supervisord.pid`").read()
logger.info(f"REBOOT : {r}")
def checkFileExist(filename):
path = "/var/user/files"
if not os.path.exists(path):
logger.debug("no folder making files folder in var/user")
os.makedirs(path)
with open(path + "/" + filename, "a") as f:
json.dump({}, f)
if not os.path.exists(path + "/" + filename):
logger.debug("no creds file making creds file")
with open(path + "/" + filename, "a") as f:
json.dump({}, f)
def convertDStoJSON(ds):
j = dict()
for x in ds:
j[x["key"]] = x["value"]
return j
def convertJSONtoDS(j):
d = []
for key in j.keys():
d.append({"key": key, "value": j[key]})
return d
def checkCredentialConfig():
logger.debug("CHECKING CONFIG")
cfgpath = "/var/user/cfg/device_supervisor/device_supervisor.cfg"
credspath = "/var/user/files/creds.json"
cfg = dict()
with open(cfgpath, "r") as f:
cfg = json.load(f)
clouds = cfg.get("clouds")
logger.debug(clouds)
#if not configured then try to configure from stored values
if clouds[0]["args"]["clientId"] == "unknown" or clouds[0]["args"]["username"] == "unknown" or not clouds[0]["args"]["passwd"] or clouds[0]["args"]["passwd"] == "unknown":
checkFileExist("creds.json")
with open(credspath, "r") as c:
creds = json.load(c)
if creds:
logger.debug("updating config with stored data")
clouds[0]["args"]["clientId"] = creds["clientId"]
clouds[0]["args"]["username"] = creds["userName"]
clouds[0]["args"]["passwd"] = creds["password"]
cfg["clouds"] = clouds
cfg = checkParameterConfig(cfg)
with open(cfgpath, "w", encoding='utf-8') as n:
json.dump(cfg, n, indent=1, ensure_ascii=False)
reboot()
else:
#assuming clouds is filled out, if data is different then assume someone typed in something new and store it, if creds is empty fill with clouds' data
checkFileExist("creds.json")
with open(credspath, "r") as c:
logger.debug("updating stored file with new data")
cfg = checkParameterConfig(cfg)
with open(cfgpath, "w", encoding='utf-8') as n:
json.dump(cfg, n, indent=1, ensure_ascii=False)
creds = json.load(c)
if creds:
if creds["clientId"] != clouds[0]["args"]["clientId"]:
creds["clientId"] = clouds[0]["args"]["clientId"]
if creds["userName"] != clouds[0]["args"]["username"]:
creds["userName"] = clouds[0]["args"]["username"]
if creds["password"] != clouds[0]["args"]["passwd"]:
creds["password"] = clouds[0]["args"]["passwd"]
else:
creds["clientId"] = clouds[0]["args"]["clientId"]
creds["userName"] = clouds[0]["args"]["username"]
creds["password"] = clouds[0]["args"]["passwd"]
with open(credspath, "w") as cw:
json.dump(creds,cw)
def checkParameterConfig(cfg):
logger.debug("Checking Parameters!!!!")
paramspath = "/var/user/files/params.json"
cfgparams = convertDStoJSON(cfg.get("labels"))
#check stored values
checkFileExist("params.json")
with open(paramspath, "r") as f:
logger.debug("Opened param storage file")
params = json.load(f)
if params:
if cfgparams != params:
#go through each param
#if not "unknown" and cfg and params aren't the same take from cfg likely updated manually
#if key in cfg but not in params copy to params
logger.debug("equalizing params between cfg and stored")
for key in cfgparams.keys():
try:
if cfgparams[key] != params[key] and cfgparams[key] != "unknown":
params[key] = cfgparams[key]
except:
params[key] = cfgparams[key]
cfg["labels"] = convertJSONtoDS(params)
_set_global_args(convertJSONtoDS(params))
with open(paramspath, "w") as p:
json.dump(params, p)
else:
with open(paramspath, "w") as p:
logger.debug("initializing param file with params in memory")
json.dump(convertDStoJSON(get_params()), p)
cfg["labels"] = get_params()
return cfg
# Helper function to split the payload into chunks
def chunk_payload(payload, chunk_size=20):
chunked_values = list(payload["values"].items())
for i in range(0, len(chunked_values), chunk_size):
yield {
"ts": payload["ts"],
"values": dict(chunked_values[i:i+chunk_size])
}
def sendData(message):
#logger.debug(message)
try:
checkCredentialConfig()
except Exception as e:
logger.error(e)
payload = {"ts": (round(dt.timestamp(dt.now())/600)*600)*1000, "values": {}}
for measure in message["measures"]:
try:
logger.debug(measure)
if abs(payload["ts"]/1000 - measure["timestamp"]) > 3600:
reboot(reason="Poll timestamp and actual timestamp out of sync. Actual: {} Poll: {}".format(payload["ts"]/1000,measure["timestamp"]))
if measure["name"] in ["wellstatus","pidcontrolmode","downholesensorstatus","alarmflowrate","alarmintakepressure","alarmintaketemperature","alarmtubingpressure","alarmvfd","alarmlockout","alarmfluidlevel","runpermissive","startpermissive","last_vfd_fault_code","vfd_fault", "flowmeter_fault"]:
logger.debug("Converting DINT/BOOL to STRING")
value = convert_int(measure["name"], measure["value"])
logger.debug("Converted {} to {}".format(measure["value"], value))
payload["values"][measure["name"]] = value
payload["values"][measure["name"] + "_int"] = measure["value"]
else:
payload["values"][measure["name"]] = measure["value"]
except Exception as e:
logger.error(e)
for chunk in chunk_payload(payload=payload):
publish(__topic__, json.dumps(chunk), __qos__)
time.sleep(2)
publish("v1/devices/me/attributes", json.dumps({"latestReportTime": (round(dt.timestamp(dt.now())/600)*600)*1000}), __qos__)
def convert_int(plc_tag, value):
well_status_codes = {
0: "Running",
1: "Pumped Off",
2: "Alarmed",
3: "Locked Out",
4: "Stopped"
}
pid_control_codes = {
0: "Flow",
1: "Fluid Level",
2: "Tubing Pressure",
3: "Manual"
}
downhole_codes = {
0: "OK",
1: "Connecting",
2: "Open Circuit",
3: "Shorted",
4: "Cannot Decode"
}
permissive_codes = {
0: "OK",
1: "Flow",
2: "Intake Pressure",
3: "Intake Temperature",
4: "Tubing Pressure",
5: "VFD",
6: "Fluid Level",
7: "Min. Downtime"
}
alarm_codes = {
0: "OK",
1: "Alarm"
}
alarm_vfd_codes = {
0: "OK",
1: "Locked Out"
}
vfd_fault_codes = {
0: "No Fault",
2: "Auxiliary Input",
3: "Power Loss",
4: "UnderVoltage",
5: "OverVoltage",
7: "Motor Overload",
8: "Heatsink OverTemp",
9: "Thermister OverTemp",
10: "Dynamic Brake OverTemp",
12: "Hardware OverCurrent",
13: "Ground Fault",
14: "Ground Warning",
15: "Load Loss",
17: "Input Phase Loss",
18: "Motor PTC Trip",
19: "Task Overrun",
20: "Torque Prove Speed Band",
21: "Output Phase Loss",
24: "Decel Inhibit",
25: "OverSpeed Limit",
26: "Brake Slipped",
27: "Torque Prove Conflict",
28: "TP Encls Confict",
29: "Analog In Loss",
33: "Auto Restarts Exhausted",
35: "IPM OverCurrent",
36: "SW OverCurrent",
38: "Phase U to Ground",
39: "Phase V to Ground",
40: "Phase W to Ground",
41: "Phase UV Short",
42: "Phase VW Short",
43: "Phase WU Short",
44: "Phase UNeg to Ground",
45: "Phase VNeg to Ground",
46: "Phase WNeg to Ground",
48: "System Defaulted",
49: "Drive Powerup",
51: "Clear Fault Queue",
55: "Control Board Overtemp",
59: "Invalid Code",
61: "Shear Pin 1",
62: "Shear Pin 2",
64: "Drive Overload",
66: "OW Torque Level",
67: "Pump Off",
71: "Port 1 Adapter",
72: "Port 2 Adapter",
73: "Port 3 Adapter",
74: "Port 4 Adapter",
75: "Port 5 Adapter",
76: "Port 6 Adapter",
77: "IR Volts Range",
78: "FluxAmps Ref Range",
79: "Excessive Load",
80: "AutoTune Aborted",
81: "Port 1 DPI Loss",
82: "Port 2 DPI Loss",
83: "Port 3 DPI Loss",
84: "Port 4 DPI Loss",
85: "Port 5 DPI Loss",
86: "Port 6 DPI Loss",
87: "IXo Voltage Range",
91: "Primary Velocity Feedback Loss",
93: "Hardware Enable Check",
94: "Alternate Velocity Feedback Loss",
95: "Auxiliary Velocity Feedback Loss",
96: "Position Feedback Loss",
97: "Auto Tach Switch",
100: "Parameter Checksum",
101: "Power Down NVS Blank",
102: "NVS Not Blank",
103: "Power Down NVS Incompatible",
104: "Power Board Checksum",
106: "Incompat MCB-PB",
107: "Replaced MCB-PB",
108: "Analog Calibration Checksum",
110: "Invalid Power Board Data",
111: "Power Board Invalid ID",
112: "Power Board App Min Version",
113: "Tracking DataError",
115: "Power Down Table Full",
116: "Power Down Entry Too Large",
117: "Power Down Data Checksum",
118: "Power Board Power Down Checksum",
124: "App ID Changed",
125: "Using Backup App",
134: "Start on Power Up",
137: "External Precharge Error",
138: "Precharge Open",
141: "Autotune Enc Angle",
142: "Autotune Speed Restricted",
143: "Autotune Current Regulator",
144: "Autotune Inertia",
145: "Autotune Travel",
13035: "Net IO Timeout",
13037: "Net IO Timeout"
}
plc_tags = {
"wellstatus": well_status_codes.get(value, "Invalid Code"),
"pidcontrolmode": pid_control_codes.get(value, "Invalid Code"),
"downholesensorstatus": downhole_codes.get(value, "Invalid Code"),
"alarmflowrate": alarm_codes.get(value, "Invalid Code"),
"alarmintakepressure": alarm_codes.get(value, "Invalid Code"),
"alarmintaketemperature": alarm_codes.get(value, "Invalid Code"),
"alarmtubingpressure": alarm_codes.get(value, "Invalid Code"),
"alarmvfd": alarm_codes.get(value, "Invalid Code"),
"alarmlockout": alarm_vfd_codes.get(value, "Invalid Code"),
"alarmfluidlevel": alarm_codes.get(value, "Invalid Code"),
"runpermissive": permissive_codes.get(value, "Invalid Code"),
"startpermissive": permissive_codes.get(value, "Invalid Code"),
"last_vfd_fault_code": vfd_fault_codes.get(value, "Invalid Code"),
"vfd_fault": vfd_fault_codes.get(value, "Invalid Code"),
"flowmeter_fault": alarm_codes.get(value, "Invalid Code")
}
return plc_tags.get(plc_tag, "Invalid Tag")

278
Pub_Sub/cpadvvfdipp/thingsboard/sub/receiveCommand.py Normal file
View File

@@ -0,0 +1,278 @@
import json, time
from datetime import datetime as dt
from quickfaas.measure import recall, write
from quickfaas.remotebus import publish
from common.Logger import logger
# Helper function to split the payload into chunks
def chunk_payload(payload, chunk_size=20):
chunked_values = list(payload["values"].items())
for i in range(0, len(chunked_values), chunk_size):
yield {
"ts": payload["ts"],
"values": dict(chunked_values[i:i+chunk_size])
}
def sync():
#get new values and send
payload = {"ts": round(dt.timestamp(dt.now()))*1000, "values": {}}
topic = "v1/devices/me/telemetry"
try:
data = recall()#json.loads(recall().decode("utf-8"))
except Exception as e:
logger.error(e)
logger.debug(data)
for controller in data:
for measure in controller["measures"]:
#publish measure
if measure["name"] in ["wellstatus","pidcontrolmode","downholesensorstatus","alarmflowrate","alarmintakepressure","alarmintaketemperature","alarmtubingpressure","alarmvfd","alarmlockout","alarmfluidlevel","runpermissive","startpermissive","last_vfd_fault_code","vfd_fault", "flowmeter_fault"]:
payload["values"][measure["name"]] = convert_int(measure["name"], measure["value"])
payload["values"][measure["name"]+ "_int"] = measure["value"]
else:
payload["values"][measure["name"]] = measure["value"]
logger.debug("Sending on topic: {}".format(topic))
logger.debug("Sending value: {}".format(payload))
for chunk in chunk_payload(payload=payload):
publish(topic, json.dumps(chunk), 1)
time.sleep(2)
def writeplctag(value):
#value in the form {"measurement": <measurement_name>, "value": <value to write>}
try:
#value = json.loads(value.replace("'",'"'))
logger.debug(value)
#payload format: [{"name": "advvfdipp", "measures": [{"name": "manualfrequencysetpoint", "value": 49}]}]
message = [{"name": "advvfdipp", "measures":[{"name":value["measurement"], "value": value["value"]}]}]
resp = write(message)
logger.debug("RETURN FROM WRITE: {}".format(resp))
return True
except Exception as e:
logger.debug(e)
return False
def receiveCommand(topic, payload):
try:
logger.debug(topic)
logger.debug(json.loads(payload))
p = json.loads(payload)
command = p["method"]
commands = {
"sync": sync,
"writeplctag": writeplctag,
}
if command == "setPLCTag":
try:
result = commands["writeplctag"](p["params"])
logger.debug(result)
except Exception as e:
logger.error(e)
elif command == "changeSetpoint":
try:
logger.debug("attempting controlpoint write")
params_type = {"measurement": "pidcontrolmode", "value": p["params"]["setpointType"]}
if params_type["value"]:
commands["writeplctag"](params_type)
time.sleep(2)
except Exception as e:
logger.error("DID NOT WRITE CONTROL MODE")
logger.error(e)
try:
logger.debug("attempting setpoint write")
modes = {0: "flowsetpoint", 1: "fluidlevelsetpoint", 2: "tubingpressuresetpoint", 3: "manualfrequencysetpoint"}
params_value = {"value": p["params"]["setpointValue"]}
if params_value["value"]:
params_value["measurement"] = modes[getMode()]
result = commands["writeplctag"](params_value)
logger.debug(result)
except Exception as e:
logger.error("DID NOT WRITE SETPOINT")
logger.error(e)
#logger.debug(command)
ack(topic.split("/")[-1])
time.sleep(5)
sync()
except Exception as e:
logger.debug(e)
def ack(msgid):
#logger.debug(msgid)
#logger.debug(mac)
#logger.debug(name)
#logger.debug(value)
publish("v1/devices/me/rpc/response/" + str(msgid), json.dumps({"msg": {"time": time.time()}, "metadata": "", "msgType": ""}), 1)
def getMode():
try:
data = recall()
for controller in data:
for measure in controller["measures"]:
if measure["name"] == "pidcontrolmode":
return measure["value"]
except:
return None
def convert_int(plc_tag, value):
well_status_codes = {
0: "Running",
1: "Pumped Off",
2: "Alarmed",
3: "Locked Out",
4: "Stopped"
}
pid_control_codes = {
0: "Flow",
1: "Fluid Level",
2: "Tubing Pressure",
3: "Manual"
}
downhole_codes = {
0: "OK",
1: "Connecting",
2: "Open Circuit",
3: "Shorted",
4: "Cannot Decode"
}
permissive_codes = {
0: "OK",
1: "Flow",
2: "Intake Pressure",
3: "Intake Temperature",
4: "Tubing Pressure",
5: "VFD",
6: "Fluid Level",
7: "Min. Downtime"
}
alarm_codes = {
0: "OK",
1: "Alarm"
}
alarm_vfd_codes = {
0: "OK",
1: "Locked Out"
}
vfd_fault_codes = {
0: "No Fault",
2: "Auxiliary Input",
3: "Power Loss",
4: "UnderVoltage",
5: "OverVoltage",
7: "Motor Overload",
8: "Heatsink OverTemp",
9: "Thermister OverTemp",
10: "Dynamic Brake OverTemp",
12: "Hardware OverCurrent",
13: "Ground Fault",
14: "Ground Warning",
15: "Load Loss",
17: "Input Phase Loss",
18: "Motor PTC Trip",
19: "Task Overrun",
20: "Torque Prove Speed Band",
21: "Output Phase Loss",
24: "Decel Inhibit",
25: "OverSpeed Limit",
26: "Brake Slipped",
27: "Torque Prove Conflict",
28: "TP Encls Confict",
29: "Analog In Loss",
33: "Auto Restarts Exhausted",
35: "IPM OverCurrent",
36: "SW OverCurrent",
38: "Phase U to Ground",
39: "Phase V to Ground",
40: "Phase W to Ground",
41: "Phase UV Short",
42: "Phase VW Short",
43: "Phase WU Short",
44: "Phase UNeg to Ground",
45: "Phase VNeg to Ground",
46: "Phase WNeg to Ground",
48: "System Defaulted",
49: "Drive Powerup",
51: "Clear Fault Queue",
55: "Control Board Overtemp",
59: "Invalid Code",
61: "Shear Pin 1",
62: "Shear Pin 2",
64: "Drive Overload",
66: "OW Torque Level",
67: "Pump Off",
71: "Port 1 Adapter",
72: "Port 2 Adapter",
73: "Port 3 Adapter",
74: "Port 4 Adapter",
75: "Port 5 Adapter",
76: "Port 6 Adapter",
77: "IR Volts Range",
78: "FluxAmps Ref Range",
79: "Excessive Load",
80: "AutoTune Aborted",
81: "Port 1 DPI Loss",
82: "Port 2 DPI Loss",
83: "Port 3 DPI Loss",
84: "Port 4 DPI Loss",
85: "Port 5 DPI Loss",
86: "Port 6 DPI Loss",
87: "IXo Voltage Range",
91: "Primary Velocity Feedback Loss",
93: "Hardware Enable Check",
94: "Alternate Velocity Feedback Loss",
95: "Auxiliary Velocity Feedback Loss",
96: "Position Feedback Loss",
97: "Auto Tach Switch",
100: "Parameter Checksum",
101: "Power Down NVS Blank",
102: "NVS Not Blank",
103: "Power Down NVS Incompatible",
104: "Power Board Checksum",
106: "Incompat MCB-PB",
107: "Replaced MCB-PB",
108: "Analog Calibration Checksum",
110: "Invalid Power Board Data",
111: "Power Board Invalid ID",
112: "Power Board App Min Version",
113: "Tracking DataError",
115: "Power Down Table Full",
116: "Power Down Entry Too Large",
117: "Power Down Data Checksum",
118: "Power Board Power Down Checksum",
124: "App ID Changed",
125: "Using Backup App",
134: "Start on Power Up",
137: "External Precharge Error",
138: "Precharge Open",
141: "Autotune Enc Angle",
142: "Autotune Speed Restricted",
143: "Autotune Current Regulator",
144: "Autotune Inertia",
145: "Autotune Travel",
13035: "Net IO Timeout",
13037: "Net IO Timeout"
}
plc_tags = {
"wellstatus": well_status_codes.get(value, "Invalid Code"),
"pidcontrolmode": pid_control_codes.get(value, "Invalid Code"),
"downholesensorstatus": downhole_codes.get(value, "Invalid Code"),
"alarmflowrate": alarm_codes.get(value, "Invalid Code"),
"alarmintakepressure": alarm_codes.get(value, "Invalid Code"),
"alarmintaketemperature": alarm_codes.get(value, "Invalid Code"),
"alarmtubingpressure": alarm_codes.get(value, "Invalid Code"),
"alarmvfd": alarm_codes.get(value, "Invalid Code"),
"alarmlockout": alarm_vfd_codes.get(value, "Invalid Code"),
"alarmfluidlevel": alarm_codes.get(value, "Invalid Code"),
"runpermissive": permissive_codes.get(value, "Invalid Code"),
"startpermissive": permissive_codes.get(value, "Invalid Code"),
"last_vfd_fault_code": vfd_fault_codes.get(value, "Invalid Code"),
"vfd_fault": vfd_fault_codes.get(value, "Invalid Code"),
"flowmeter_fault": alarm_codes.get(value, "Invalid Code")
}
return plc_tags.get(plc_tag, "Invalid Tag")